Thanks guys; checking the G2 with it dark reveled about 60 volts. checking after pulling the crt socket off showed 350+. Bingo, bad crt. Walter --- Shaun <ssroark@xxxxxxxx> wrote: > I had one in the shop yesterday that was doing > that it was the HK short I used my Sencore CR-70 > to fix it. Also I have seen a resistor on the crt > board open up and cause this problem. I can > remember the value but there aren't that many on > there but it was right off the g2 wire on the crt > board/ > Shaun > Advanced Electronics > Fort Morgan, CO 80701 > (970)867-3124 > ssroark@xxxxxxxx > ----- Original Message ----- > From: Premium Technologies > To: techassist@xxxxxxxxxxxxx > Sent: Friday, March 08, 2002 2:25 PM > Subject: [TechAssist] Re: Zenith model Z25X22 > board no. 9-1808 loses brightness. > > > > Hi Walter, > I'd suspect the CRT, you might want to test > that. Also take a look at the > center gun, (green), in the neck at the point > when it goes dark and see if > you find some arcing going on just prior to > failure. > Hope this helps. > Bill > > Premium Technologies > Ocean Park, WA. 98640 > Phone: (360) 665-5984 > Fax: (775) 860-7747 > email: premtech@xxxxxxxxxxxxxx > ----- Original Message ----- > From: "walter wood" <wwood_38478@xxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Friday, March 08, 2002 12:25 PM > Subject: [TechAssist] Zenith model Z25X22 board > no. 9-1808 loses brightness. > > > > > > > > > > > > > > This set plays ok for a few minutes then > goes > > > very > > > dark, just has some reddish blue outlines. > > > When the set is working normally the screen > (G2) > > > control works. > > > When it goes dark the screen control has no > > > effect > > > except to vary the focus a little. > > > no ammount of beating banging or freeze > spray > > > changes it. > > > I suspect the flyback. > > > Does anyone have a different opinion? > > > Thanks > > > Walter > > > > > > ===== > > Walter Wood > > Future Tech Home Center > > 2786 Hwy. 43 N. > > Lawrenceburg Tn. 38464 > > 931-829-3337 > > Fax 931-829-4044 > > mailto:wwood_38478@xxxxxxxxx > > > > > __________________________________________________ > > Do You Yahoo!? > > Try FREE Yahoo! Mail - the world's greatest > free email! > > http://mail.yahoo.com/ > > ------------------------------------------ > > Make your TechAssist database better! > > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ > > To UNSUBSCRIBE your email address, click > here: > > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > Or send a BLANK email with unsubscribe in the > > SUBJECT field to the address above. > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > ===== Walter Wood Future Tech Home Center 2786 Hwy. 43 N. Lawrenceburg Tn. 38464 931-829-3337 Fax 931-829-4044 mailto:wwood_38478@xxxxxxxxx __________________________________________________ Do You Yahoo!? Try FREE Yahoo! Mail - the world's greatest free email! http://mail.yahoo.com/ ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.