[TechAssist] Re: Zenith Z32X31D(GX Chassis) w/9-01812 Module has bad QX3401
- From: "Video Clinic- Pana" <videoclinicpana@xxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Fri, 8 Mar 2002 19:37:24 -0600
dont for get to add an isolation transformer in the filament circuit to
isolate the pix tube from the power supply.. ive had very good luck with
this.
roy aka videoclinicpana@xxxxxxxxx
----- Original Message -----
From: "Jeff Dougherty" <jeff@xxxxxxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Friday, March 08, 2002 6:38 PM
Subject: [TechAssist] Re: Zenith Z32X31D(GX Chassis) w/9-01812 Module has
bad QX3401
>
> Dale,
> Replace the cap next to the regulator, AND the regulator.
> Also advise the customer, these parts may have failed due to an
intermittent
> short in the picture tube, your repair may last a week or several months.
> Jeff
>
> FAX 717-564-4952
> Jeff Dougherty
> Intrepid Video & Electronics
> 501 Luther Rd
> Harrisburg, PA 17111
> 717-909-8844
> VCR tips, electronics info & general interest.
> www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com
>
>
> ----- Original Message -----
> From: <HarrisTV50010@xxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Friday, March 08, 2002 10:38 AM
> Subject: [TechAssist] Zenith Z32X31D(GX Chassis) w/9-01812 Module has bad
> QX3401
>
>
> >
> > We are working on a Zenith Model# Z32X31D, GX Chassis, Main Module #
> 9-01812
> >
> > It has a Shorted QX3401, open RX3404, RX3406 & FX3401. ICX3431(STR53041)
> > seems to be OK when checked with an ohm meter. Does any one have any
ideas
> > what might have caused this and are there any other parts that normally
go
> > bad?
> >
> > Thanks,
> > Dale
> >
> > Dale A. Lubow... HarrisTV50010@xxxxxxx ..515-232-1109..(Fax)515-232-3356
> > Harris TV & Appliance..........335 Lincoln
> > Way.....Ames.....Iowa.....50010-3384
> > ------------------------------------------
> > Make your TechAssist database better!
> > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> > ------------------------------------------
> > To UNSUBSCRIBE your email address, click here:
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > Or send a BLANK email with unsubscribe in the
> > SUBJECT field to the address above.
> >
>
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.332 / Virus Database: 186 - Release Date: 3/6/2002
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
