Had that happen to a Magnavox Cure was a Kit that added shield over the main processor and shield was grounded. Set was picking up magnet pulses from the DAG on the CRT. agower@xxxxxxxxxxxxx Cordova TV Adolph Gower 3415 Comet Court Sacramento, Ca. 95827-2924 Phone: (916) 698-6565 Fax: (916) 363-8359 ----- Original Message ----- From: "Phil Bader" <tjanphyl@xxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: 2005Äê4ÔÂ11ÈÕ 6:57 Subject: [TechAssist] Zenith SG2795BK Gibberish text characters all over screen. intermittant > Customer said sometimes there would be text characters all over the > screen.Gibberish. No sense to them. usually clears. got worse. > This older set has the "main" board on bottom, the one thats completely > shielded top and bottom. think it's the 9-700. Known for lots of cold > solder connections. I pulled it. Completely resolderd it and set seemed > OK. two days later customer said it's back. I noted when it happened for > me, usually just after plug in and power up, I could hit Enter to clear. > I assume this main board is at fault but what. > Board compliment in this set: > Video 9-369-09 > SMPS 9-604-03 > Sweep: 9-605-01 > Main: 9-700-18 > IF/Audio: 9-701 > Keyboard/Micro: 9-943 > Could use assist here. > is a character generator flakey? > What/Where? > Phil Bader > > -- > > Philip Bader > Jan Phyl TV Inc. (estab. 1976) > 3420 Recker Hwy. Winter Haven, Fl. 33880 > Fax (863) 299-8821 > email: tjanphyl@xxxxxxxxxxxxxxx > > ----------------------------------------------------------------------------- > This Email List is Public. Remove: http://www.tech-assist.org/remove.htm > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/