[TechAssist] Re: Zenith Projector PVR4663dt B+ not getting to HOT
- From: "Shoreline Electronics" <jstielau@xxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Sat, 25 May 2002 18:40:33 -0400
Ray,
Check for a cracked/burnt solder connection on rectifier diodes next to the
SMPS power transformer.
Jeff Stielau
Shoreline Electronics Repair
125 Beech Tree Lane
Westbrook, CT 06498
860-399-1861
860-664-3535 (fax)
jstielau@xxxxxxxx
----- Original Message -----
From: "ray clarke" <ray260@xxxxxxxxx>
To: "tech" <techassist@xxxxxxxxxxxxx>
Sent: Friday, May 24, 2002 6:47 PM
Subject: [TechAssist] Zenith Projector PVR4663dt B+ not getting to HOT
>
> This one came in with the pos. juntion of the
> rectifier bridge burned out and arcing. I can't trace
> how the b+ gets to the hot. only have the c3 schem.
> from zenith .Close but no cigar.
> Thanks ray
> Billette TV Howick QUE.
>
> __________________________________________________
> Do You Yahoo!?
> LAUNCH - Your Yahoo! Music Experience
> http://launch.yahoo.com
> ------------------------------------------
> To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
> http://www.tech-assist.org/change.html
> ------------------------------------------
> ***NEW*** Tips Added Instantly!!!***
> Submit Repair Tips here:
> http://www.tech-assist.org/secure/tip/
>
>
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.tech-assist.org/change.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
