Neither will power the unit up. Both appear dead in spite of having measurable outputs, although they do vary some. "David J. Williams" wrote: > what type of problem is the unit having? > > -----Original Message----- > From: techassist-bounce@xxxxxxxxxxxxx > [mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of Doug Keller > Sent: Thursday, March 14, 2002 10:15 AM > To: TechAssist > Subject: [TechAssist] VCR power supply, Orion/Samsung plug-in supply > mod# VR3602 > > I have 2 of these. They are plug-in power supplies with a 9 pin > connector. On PS "A", voltages are: pin 1 grd, pin 2 30v, pin 3 19.7v, > pin 4 grd, pin 5 14.3v, pin 6 5.8v, pin 7 -24.9v, pin 8 -14.4v, pin 9 > -19.4v > On PS "B" they are: pin 1 grd, pin 2 33.8v, pin 3 23.5v, pin 4 grd, pin > 5 15.5, pin 6 5.8v, pin 7 -25.5v, pin 8 -14.2v, pin 9 -19.7v > Numbers on actual boards: "A" 66029-0623-00 > "B" 66029-0527-00 B > Does anyone have a print for these plug-in supplies? I don't want to end > up with more in them than they are worth. > thanks, > Doug > -- > Doug Keller > Wis-Kel Electronics > 101 Freeland Ave. > Terra Alta, WV > USA 26764 > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. -- Doug Keller Wis-Kel Electronics 101 Freeland Ave. Terra Alta, WV USA 26764 ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.