I know. Still resolder what I suggested. -Clint God Bless Us All Clint Hamilton, Owner http://OrpheusComputing.com sales@xxxxxxxxxxxxxxxxxxxx Fax: 209-882-9602 TechAssist Administration http://tech-assist.org techassist@xxxxxxxxxxxxx ----- Original Message ----- From: "Ron Miller" <rlmbkm@xxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, November 09, 2001 9:22 AM Subject: [TechAssist] UPDATERe: KP46S15 Distorted pix,NOT CONV. problem I have replaced the TWO stk392-010 also IC501 on D board,I said not conv output problem,Pix is stretched at bottom vert sweep changing. Ron Miller D.T.V. Texas ----- Original Message ----- From: "TechAssist Admin." <techassist@xxxxxxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, November 09, 2001 1:19 AM Subject: [TechAssist] Re: KP46S15 Distorted pix,NOT CONV. problem > > Ron, common problem. Resolder the convergence IC's. If it > has module "D" and IC1705, that's especially what you want to > resolder. > -Clint > > God Bless Us All > Clint Hamilton, Owner > http://OrpheusComputing.com > sales@xxxxxxxxxxxxxxxxxxxx > Fax: 209-882-9602 > TechAssist Administration > http://tech-assist.org > techassist@xxxxxxxxxxxxx > > > ----- Original Message ----- > From: "Ron Miller" <rlmbkm@xxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Thursday, November 08, 2001 1:57 PM > Subject: [TechAssist] KP46S15 Distorted pix,NOT CONV. problem > > > > Have changed STK392-010. > This one hard to describe:pix is basically convergered,pix > has 3 colored > lines that flash though pix when blank screen see 3 bowed > lines,top of pix > looks like vert sweep changing amplitude.Pix is not out of > convergence pix > ix bowed and stretched at bottom. > This is a interment but changes good to bad quickly,I know > the jungle > cxa1477as gives problems in these but is this problem > somewhere else?Don't > get many of these, hanks. > Ron Miller > D.T.V. Texas > > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > > > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > > > Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line. Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.