[TechAssist] Re: UPDATERe: KP46S15 Distorted pix,NOT CONV. problem

  • From: "Ron Miller" <rlmbkm@xxxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Sat, 10 Nov 2001 08:55:40 -0600

Domon, did that on Fri. drive is bad looking for good place to order from
one Sony dist.says $79 for chip E.P.C. on the west coast says $28.
 I wonder why such a large difference in price on Sony parts?
Ron Miller
D.T.V. Texas

----- Original Message -----
From: "Damon" <DAMON101@xxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Saturday, November 10, 2001 7:06 AM
Subject: [TechAssist] Re: UPDATERe: KP46S15 Distorted pix,NOT CONV. problem


>
> Have you monitored the vertical drive signal off of the M board?? There's
a
> plug clearly marked at the top of  M that connects to the D board
> labeled.....If there's any doubt about that Ic being bad, replace it. I've
> had only bad convergence and video jungle Ics on this set.
> Good luck.
> ----- Original Message -----
> From: "Ron Miller" <rlmbkm@xxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Friday, November 09, 2001 10:22 AM
> Subject: [TechAssist] UPDATERe: KP46S15 Distorted pix,NOT CONV. problem
>
>
> >
> > I have replaced the TWO stk392-010 also IC501 on D board,I said not conv
> > output problem,Pix is stretched at bottom vert sweep changing.
> > Ron Miller
> > D.T.V. Texas
> >
> > ----- Original Message -----
> > From: "TechAssist Admin." <techassist@xxxxxxxxxxxxxxxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Friday, November 09, 2001 1:19 AM
> > Subject: [TechAssist] Re: KP46S15 Distorted pix,NOT CONV. problem
> >
> >
> > >
> > > Ron, common problem.  Resolder the convergence IC's.  If it
> > > has module "D" and IC1705, that's especially what you want to
> > > resolder.
> > > -Clint
> > >
> > > God Bless Us All
> > > Clint Hamilton, Owner
> > > http://OrpheusComputing.com
> > > sales@xxxxxxxxxxxxxxxxxxxx
> > > Fax: 209-882-9602
> > > TechAssist Administration
> > > http://tech-assist.org
> > > techassist@xxxxxxxxxxxxx
> > >
> > >
> > > ----- Original Message -----
> > > From: "Ron Miller" <rlmbkm@xxxxxxxx>
> > > To: <techassist@xxxxxxxxxxxxx>
> > > Sent: Thursday, November 08, 2001 1:57 PM
> > > Subject: [TechAssist] KP46S15 Distorted pix,NOT CONV. problem
> > >
> > >
> > >
> > > Have changed STK392-010.
> > > This one hard to describe:pix is basically convergered,pix
> > > has 3 colored
> > > lines that flash though pix when blank screen see 3 bowed
> > > lines,top of pix
> > > looks like vert sweep changing amplitude.Pix is not out of
> > > convergence pix
> > > ix bowed and stretched at bottom.
> > >  This is a interment but changes good to bad quickly,I know
> > > the jungle
> > > cxa1477as gives problems in these but is this problem
> > > somewhere else?Don't
> > > get many of these, hanks.
> > > Ron Miller
> > > D.T.V. Texas
> > >
> > >
> > > Help make your TechAssist online repair tips
> > > database better!  Submit your fixes here:
> > > http://www.circuitwork.com/techassist/tip/#tips
> > > To unsubscribe write to:
> > > techassist-request@xxxxxxxxxxxxx
> > > with  unsubscribe  in the subject line.
> > >
> > >
> > >
> > > Help make your TechAssist online repair tips
> > > database better!  Submit your fixes here:
> > > http://www.circuitwork.com/techassist/tip/#tips
> > > To unsubscribe write to:
> > > techassist-request@xxxxxxxxxxxxx
> > > with  unsubscribe  in the subject line.
> > >
> > >
> > >
> >
> > Help make your TechAssist online repair tips
> > database better!  Submit your fixes here:
> > http://www.circuitwork.com/techassist/tip/#tips
> > To unsubscribe write to:
> > techassist-request@xxxxxxxxxxxxx
> > with  unsubscribe  in the subject line.
> >
>
> *****************************************
> Help make your TechAssist online repair tips
> database better!  Submit your fixes here:
> http://www.circuitwork.com/techassist/tip/#tips
> *****************************************
> To UNSUBSCRIBE write to:
> techassist-request@xxxxxxxxxxxxx
> with  unsubscribe  in the subject line.
>
>
>

*****************************************
Help make your TechAssist online repair tips 
database better!  Submit your fixes here: 
http://www.circuitwork.com/techassist/tip/#tips
*****************************************
To UNSUBSCRIBE write to:
techassist-request@xxxxxxxxxxxxx 
with  unsubscribe  in the subject line.

Other related posts: