Customer left a detailed description with the set. (last month we fixed it for "dead set" with pico fuse on power board+ resoldered converg. board,etc per Toshiba bulliten for when that F470 fuse goes) cust says: /"Flashes several times on 720. When picture came in it is white with a splash of color here and there. 420 and 1080i work fine. When formatting Res. change & flashes on pillar." /Read from that what you will... When I powered up this set here in shop it was set to "Colorstream mode HD1" Now... I have a sencore VP301 with the following HD modes, and I have noted here the effect I get on this set switching from one to the next (using the component video inputs): 480 i 29: good display with my Sencore VP301 on the HD inputs. 480 i 30: good 480 p 59:good 480 p 60: good 720 p 59: good 720 p 60: good 960 p 59: blank ("blank" usually means I see the horiz goes instantly out of freq then screen is black) 1080 i 25 blank 1080 i 29: good 1080 i 30: good 1080 p 50: blank 1080 p 59: blank 1080 p 60: blank 1080 p 24: blank 1080 s 24: blank I havn't yet gone all thru the cust. menu incase there is some setting causing this. Should this set display ALL these Sencore HD rates? Phil Bader // -- Philip Bader Jan Phyl TV Inc. (estab. 1976) 3420 Recker Hwy. Winter Haven, Fl. 33880 Fax (863) 299-8821 email: tjanphyl@xxxxxxxxxxxxxxx ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/