> Haven't found any flow charts or theory on this > one. > Likely Toshiba didn't build it anyway. > > DEAD, nothin' at all when power is pushed. > Lightning likely, but nothing burned and fuse > good. On primary side > IC501 > pin 1 167vdc > 2 0 > 3 0 > 4 12 to 14vdc > 5 0 On secondary side > D 514 2.1 to 2.5vdc > D 511 0 to 0.6 > D 512 4 to 5 > D 510 86 to 91 > D 505 0 > D 509 30 > > I'm having a hard time deciding if the Scan and > Data lines are being pulled down, as it looks > like > the 5 volts isn't being developed in the first > place. Anyone seen one of these before? > Ideas?? > Starting place?? > By the way, the 167 volts remains even when the > set > is unplugged. > perhaps something open in the primary?/ > Walter ===== Walter Wood Future Tech Home Center 2786 Hwy. 43 N. Lawrenceburg Tn. 38464 931-829-3337 Fax 931-829-4044 mailto:wwood_38478@xxxxxxxxx __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com ***************************************************************************** Classifieds! Buy or Sell! http://sell.tech-assist.org The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/