Make sure Cable mode is switched to Standard not IRC. -Ed- Tel-Tek Electronics Ontario-Canada "If Apple and Microsoft can talk...why can't the rest of the World?" teltek2@xxxxxxxxxxxx ----- Original Message ----- From: "Kevin" <kevintv@xxxxxxx> To: "TECH-ASSIST" <techassist@xxxxxxxxxxxxx> Sent: Wednesday, January 22, 2003 1:46 AM Subject: [TechAssist] Toshiba 27" CX2978C TAC8827 Can't program Ch 6, grainy picture > Hi fellow techs, > > I have seen this before. I can't program channel 6, NBC into the > channel lineup. When I autoprogram the channels, ch. 6 is missing. > Then I use the remote to go to ch 6 directly and then press ADD on the > front of the TV and it still doesn't get programmed in. When I am on ch > 5 and press ch up it jumps to ch 7. Also picture is quite grainy on > most channels. Any ideas? > > Kevin Wilks > Kevin's TV & Video Repair > Penticton BC Canada > kevintv@xxxxxxx > > > ------------------------------------------ > Submit A Repair Tip For Everyone Here: > http://www.tech-assist.org/secure/tip/main.html > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html