unsolder pin 16 .check voltage .if up bad ic Bob --- On Thu 01/11, David Lessard < mr_fixit@xxxxxxxxxxxx > wrote: From: David Lessard [mailto: mr_fixit@xxxxxxxxxxxx] To: tv@xxxxxxxxxxxxxxx, techassist@xxxxxxxxxxxxx Date: Thu, 11 Jan 2007 09:49:22 -0500 Subject: [TechAssist] [TV] CTC169 - Dead Hello Techs,<br> <br>I have a CTC169 that is dead, the SMPS chopper transistor is intact and<br>so is the HOT, I have no voltage at either end of CR4118; I have 15V at<br>U4101 pin 16. I have parts coming in today, all the caps around U4101,<br>NTE580 (CR4118), TEA2261, etc. I want to be sure about what is causing<br>the problem, does anyone have a troubleshooting flow chart on the SMPS<br>or any tips on what I should be looking for.<br> <br>Thanks,<br> <br>David Lessard<br>Mr_fixit@xxxxxxxxxxxx<br> <br><br>-----------------------------------------------------------------------------<br>Remove: http://www.tech-assist.org/remove.htm<br>Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation<br>Lost Password: http://www.tech-assist.org and select "Login Problems?".<br>Email Archives: //www.freelists.org/archives/techassist/<br> ----------------------------------------------------------------------------- Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/