Hello Techs, I have a CTC169 that is dead, the SMPS chopper transistor is intact and so is the HOT, I have no voltage at either end of CR4118; I have 15V at U4101 pin 16. I have parts coming in today, all the caps around U4101, NTE580 (CR4118), TEA2261, etc. I want to be sure about what is causing the problem, does anyone have a troubleshooting flow chart on the SMPS or any tips on what I should be looking for. Thanks, David Lessard Mr_fixit@xxxxxxxxxxxx ----------------------------------------------------------------------------- Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/