39v on the HOT shouldn't be right. Either it's being pulled down(HV,Pix Tube,yoke,secondary Rectifiers) or it can't handle a load(Power Supply) Peggs At 12:25 PM 6/24/04, Gary McCartney wrote: >I have a Sony 24" KV24FV10 flat CRT set in the shop. The set doesn't >start up. It just chirps continuously. On the odd occasion, the sound >will come on for maybe 3 seconds then the power simply turns off. The >waveforms on the HOT base and collctor are also pulsing but don't look >proper. I get 39V dc on the HOT collector as it pulses. > >I have removed the flyback and tested it with my HR Diemen flyback >tester and I get a perfect looking collector waveform with it. Tester >shows flyback to be working fine (those not familiar, this tester >actually connects the anode lead and drives the flyback just like the TV >hor. output stage, although at a reduced test rate. I haven't had this >tester fail me yet). I have also soldered the hor. driver transformer >and other connections on main board and power supply board. Have checked >for bad transistors diodes and resistors as well. I downloaded the >manual and am looking it over now. > >Are there any common faults for these symptoms? I've read that the >flyback is a possibility but with my test, I'm not sure what to make of >that. > >Thanks for any help. >-- > > > > >Gary McCartney > >McCartney Electronics >Guelph Ontario Canada >Est. 1984 >email: gary (at) number63.ca > > >----------------------------------------------------------------------------- >Lost Password: >http://www.tech-assist.org and select "Login Problems?". >Email Archives: >//www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/