David, Unless this is your unit or you REALLy need the work, give it back to them. Both problems are probably bad caps. The EVF is most likely a bad C438, 22@16. The other problem is likely that the drum motor doesn't turn, causing it to error to eject mode. If so, examine the SS100 board for leaky s/m caps. You may find a bunch bad. Good luck, Kenneth Smith Gulf Technical Services 3034 Gulf Breeze Parkway Gulf Breeze, FL 32563 850-934-8324 (Voice) 850-932-0819 (Fax) On Tue, 19 Apr 2005 16:36:36 -0400 "David Lessard" <mr_fixit@xxxxxxxxxxxx> writes: > Tape loads ok but eject sign appears a few seconds after tape loads > then > no functions, i.e. RW, FF, PLAY, etc because unit thinks there is no > tape. Euras database has a tip on this but I'm not a member. Second > problem: In CAM mode, view finder image is out of sync vertically. > Do > any of these problems sound familiar to anyone? > > Thanks, > > David Lessard > Mr_fixit@xxxxxxxxxxxx > Alexandria, Ontario, Canada > > ------------------------------------------------------------------------- ---- > This Email List is Public. Remove: > http://www.tech-assist.org/remove.htm > Lost Password: http://www.tech-assist.org and select "Login > Problems?". > Appliance Repair List: > http://www.tech-assist.org/secure/tip/chatjoin.htm#app > Email Archives: //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Appliance Repair List: http://www.tech-assist.org/secure/tip/chatjoin.htm#app Email Archives: //www.freelists.org/archives/techassist/