[TechAssist] Re: Sharp VCR VC-H903U
- From: Ed Gaidies <teltek2@xxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 23 May 2002 17:56:38 -0400
D707 was the reel-sensor.
- Ed -
Ed Gaidies
TEL-TEK ELECTRONICS
Midland, Ontario, Canada.
teltek2@xxxxxxxxxxxx
teltek@xxxxxxx
> From: "J Silverman" <greentron@xxxxxxxxxxxxxxxx>
> Reply-To: techassist@xxxxxxxxxxxxx
> Date: Thu, 23 May 2002 17:22:32 -0400
> To: <techassist@xxxxxxxxxxxxx>
> Subject: [TechAssist] Re: Sharp VCR VC-H903U
>
>
> I tried to give a general answer because there are all sorts of things that
> create a reel stop other than the sensor itself. If its optical, the mirror
> or the led or sensor could just be dirty. Sometimes a piece of paper gets
> under there. On one vcr, the mirror was just glued on to the reel and had
> fallen off. Glued it back on.
> Jerry Silverman
> Greentron Inc
> 4 Newland Ave
> Greenville SC 29609
> 864 232 3889
> Fax 271 2080
> mailto:greentron@xxxxxxx
> ----- Original Message -----
> From: "Tel-Tek Electronics" <teltek2@xxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Thursday, May 23, 2002 4:31 PM
> Subject: [TechAssist] Re: Sharp VCR VC-H903U
>
>
>>
>> Your right...Jerry. It was D707. Fixed yesterday. Found fix on Jeff's CD.
>>
>> -Ed-
>> Tel-Tek Electronics
>> Midland, Ont. Canada.
>> teltek2@xxxxxxxxxxxx
>>
>> "Quality will be remembered, long after Price is forgotten"
>> ----- Original Message -----
>> From: "J Silverman" <greentron@xxxxxxxxxxxxxxxx>
>> To: <techassist@xxxxxxxxxxxxx>
>> Sent: Wednesday, May 22, 2002 5:17 PM
>> Subject: [TechAssist] Re: Sharp VCR VC-H903U
>>
>>
>>>
>>> Sounds like a reel sensor problem.
>>> Jerry Silverman
>>> Greentron Inc
>>> 4 Newland Ave
>>> Greenville SC 29609
>>> 864 232 3889
>>> Fax 271 2080
>>> mailto:greentron@xxxxxxx
>>> ----- Original Message -----
>>> From: "Tel-Tek Electronics" <teltek2@xxxxxxxxxxxx>
>>> To: "AAAA TECH-ASSIST" <techassist@xxxxxxxxxxxxx>
>>> Sent: Wednesday, May 22, 2002 12:08 PM
>>> Subject: [TechAssist] Sharp VCR VC-H903U
>>>
>>>
>>>>
>>>> Model VC-H903U
>>>>
>>>> Unit will go into Play for about 4 to 5 seconds, then stop.
>>>> Automatically goes to Rewind for about 4 seconds, then goes to Fast
>>> Forward
>>>> for 4 seconds, and then stops.
>>>> Unit will remain powered up, but repeats the same cycle each time the
>> Play
>>>> is pushed.
>>>> When F/F or Rewind is pushed, will run the same amount of time
>> (4seconds)
>>>> then stop.
>>>> Have replaced the basket from a junker, have cleaned the mode switch
> and
>>>> checked alignment of mode switch.
>>>> Anybody had these "woes"
>>>>
>>>> TIA.
>>>>
>>>> -Ed-
>>>> Tel-Tek Electronics
>>>> Midland, Ont. Canada.
>>>> teltek2@xxxxxxxxxxxx
>>>>
>>>> "Quality will be remembered, long after Price is forgotten"
>>>>
>>>> ------------------------------------------
>>>> To REMOVE your email address, click here:
>>>> http://www.tech-assist.org/unsubb.html
>>>> To CHANGE your email address, click here:
>>>> http://www.tech-assist.org/change.html
>>>> ------------------------------------------
>>>> ***NEW*** Tips Added Instantly!!!***
>>>> Submit Repair Tips here:
>>>> http://www.tech-assist.org/secure/tip/
>>>>
>>>
>>> ------------------------------------------
>>> To REMOVE your email address, click here:
>>> http://www.tech-assist.org/unsubb.html
>>> To CHANGE your email address, click here:
>>> http://www.tech-assist.org/change.html
>>> ------------------------------------------
>>> ***NEW*** Tips Added Instantly!!!***
>>> Submit Repair Tips here:
>>> http://www.tech-assist.org/secure/tip/
>>>
>>>
>>
>> ------------------------------------------
>> To REMOVE your email address, click here:
>> http://www.tech-assist.org/unsubb.html
>> To CHANGE your email address, click here:
>> http://www.tech-assist.org/change.html
>> ------------------------------------------
>> ***NEW*** Tips Added Instantly!!!***
>> Submit Repair Tips here:
>> http://www.tech-assist.org/secure/tip/
>>
>
> ------------------------------------------
> To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
> http://www.tech-assist.org/change.html
> ------------------------------------------
> ***NEW*** Tips Added Instantly!!!***
> Submit Repair Tips here:
> http://www.tech-assist.org/secure/tip/
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.tech-assist.org/change.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
