Check for bad solder joints. Check Cliff ----- Original Message ----- From: "John @ Myers TV" <myers_tv_b@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, March 03, 2005 9:52 AM Subject: [TechAssist] Sharp 32L-S400B, No video/audio, has OSD > OK, here's another dog. > Sharp M# 32L-S400B > No video/ audio / snow > Here's what I've done so far. > > 1) changed EEPROM - more on this later > > 2) Changed jungle IC201 (RH-IX3253CEZZ) - Using a video input, I have video > going in on pin 39, but am getting just the blanking pulses out at pin41. > > 3) This morning I noticed that the new EEPROM is not recognizing the front > A/V jacks on the set, even after re-initializing. I ordered the exact IC for > the set, but I beginning to think I was right on with the EEPROM, but just > got the wrong one as a replacement. > > Any ideas? > > John Myers > Myers TV Service Company > 376 E. State St. > Alliance, OH 44601 > Phone (Voice & Fax) (330) 821-6545 > myers_tv_b@xxxxxxxxxxxxx > www.myerstv.net > > -------------------------------------------------------------------------- --- > This Email List is viewable to the Public. > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- This Email List is viewable to the Public. Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/