My set is a Canadian set so probably different part No. ----- Original Message ----- From: "John at Main TV" <maintv2004@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, April 21, 2004 4:05 PM Subject: [TechAssist] Re: Sanyo 27 in TV Model 62C852U need value for R628 > OK, but I do not see a R628. The parts list only shows "special" resistors > in the Sams. The audio circuit uses Rxxx type numbers but no R628. John. > > John Mielke > Main TV > 636 main St. > Longmont, Co > phone 303 776 6955 > fax 303 776 0792 > maintv2004@xxxxxxxxxxx > ----- Original Message ----- > From: "FERNAND GOGUEN" <fgoguen@xxxxxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Tuesday, April 20, 2004 6:56 PM > Subject: [TechAssist] Re: Sanyo 27 in TV Model 62C852U need value for R628 > > > > Yes it is in the audio circuit. > > ----- Original Message ----- > > From: "John at Main TV" <maintv2004@xxxxxxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Wednesday, April 21, 2004 1:37 PM > > Subject: [TechAssist] Re: Sanyo 27 in TV Model 62C852U need value for R628 > > > > > > > I do not have that manual but the US version of that model is AVM252 > > (manu. > > > 1990) and is in Sams 2837-2. Maybe someone has that manual that they > > could > > > e-mail. However, assuming my model cross is correct, I could not find a > > > R628. There is a R608 that is a 680 ohm 2 watt that goes from +160 volt > > > source to the collector of the audio out. Can you tell if this resistor > > is > > > in the audio circuit? John. > > > > > > John Mielke > > > Main TV > > > 636 main St. > > > Longmont, Co > > > phone 303 776 6955 > > > fax 303 776 0792 > > > maintv2004@xxxxxxxxxxx > > > ----- Original Message ----- > > > From: "FERNAND GOGUEN" <fgoguen@xxxxxxxxxxxxxxx> > > > To: <techassist@xxxxxxxxxxxxx> > > > Sent: Tuesday, April 20, 2004 3:32 PM > > > Subject: [TechAssist] Sanyo 27 in TV Model 62C852U need value for R628 > > > > > > > > > > I could use a scan for the above tv. Came in dead and upon inspecting > > the > > > chassis found this resistor burned almost to a crisp. The ckb under this > > > resistor is all black and the solder pads where this resistor connects > are > > > all broken. > > > > Chassis # G3E-852U1. TIA > > > > Fernand Goguen > > > > Goguen TV Service > > > > Cocagne, N.B. CANADA > > > > > > > > > > > -------------------------------------------------------------------------- > > > --- > > > > Lost Password: > > > > http://www.tech-assist.org and select "Login Problems?". > > > > Email Archives: > > > > //www.freelists.org/archives/techassist/ > > > > > > > > > > > -------------------------------------------------------------------------- > > --- > > > Lost Password: > > > http://www.tech-assist.org and select "Login Problems?". > > > Email Archives: > > > //www.freelists.org/archives/techassist/ > > > > > > -------------------------------------------------------------------------- > --- > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/