For Sanyo,ALWAYS, include the chass #.,as one chass will be used for many models.If this is a G3E chass,R608 is a raw B+ dropping resistor,which feeds the collector of Q603=Audio o/p.Also check Q601 & 602.What is your REG B+ on pin 4 of IC001=STR3130.should be 130vdc.Try to include more info on your post,ie,what is the unit doing?Does it have a pix,HV,shuts off,etc.................................... Don of HARTS-TVCR''ASC'' 9 Robert St,Oromocto,NB,Can,E2V3N2 hartstv@xxxxxxxxxxx Tel-5063579785,fax-3576010 cel-4701719 ----- Original Message ----- From: "FERNAND GOGUEN" <fgoguen@xxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, May 20, 2004 6:33 PM Subject: [TechAssist] Re: Sanyo 27 in TV Model 62C852U need value for R628 > I am still fighting this beast. I contacted Sanyo and was told that R628 > (R608) was a 680 ohm 2 watt resistor. I replaced it and as soon as I apply > power the resistor starts to smoke. I checked and I have 167 volts on one > side and 85 volts on the other side. I checked all transistors , diodes , > caps and find no shorts. > Does any one have a print that they couls email me? I would appreciate it. > Fernand Goguen > Goguen TV Service > Cocagne, N.B. CANADA > ----- Original Message ----- > From: "John at Main TV" <maintv2004@xxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Wednesday, April 21, 2004 1:37 PM > Subject: [TechAssist] Re: Sanyo 27 in TV Model 62C852U need value for R628 > > > > I do not have that manual but the US version of that model is AVM252 > (manu. > > 1990) and is in Sams 2837-2. Maybe someone has that manual that they > could > > e-mail. However, assuming my model cross is correct, I could not find a > > R628. There is a R608 that is a 680 ohm 2 watt that goes from +160 volt > > source to the collector of the audio out. Can you tell if this resistor > is > > in the audio circuit? John. > > > > John Mielke > > Main TV > > 636 main St. > > Longmont, Co > > phone 303 776 6955 > > fax 303 776 0792 > > maintv2004@xxxxxxxxxxx > > ----- Original Message ----- > > From: "FERNAND GOGUEN" <fgoguen@xxxxxxxxxxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Tuesday, April 20, 2004 3:32 PM > > Subject: [TechAssist] Sanyo 27 in TV Model 62C852U need value for R628 > > > > > > > I could use a scan for the above tv. Came in dead and upon inspecting > the > > chassis found this resistor burned almost to a crisp. The ckb under this > > resistor is all black and the solder pads where this resistor connects are > > all broken. > > > Chassis # G3E-852U1. TIA > > > Fernand Goguen > > > Goguen TV Service > > > Cocagne, N.B. CANADA > > > > > > > -------------------------------------------------------------------------- > > --- > > > Lost Password: > > > http://www.tech-assist.org and select "Login Problems?". > > > Email Archives: > > > //www.freelists.org/archives/techassist/ > > > > > > > -------------------------------------------------------------------------- > --- > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/