[TechAssist] Re: SONY TV VERTICAL NOT FULL
- From: "VRM" <vrmsys@xxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Tue, 8 Jan 2002 15:59:11 -0000
Hello;
Kindly send me the service code to enable me do just as suggested.
Thanks a Lot
Viktoria
----- Original Message -----
From: "Kaushik Chudasama" <westend@xxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Monday, December 24, 2001 5:06 PM
Subject: [TechAssist] Re: SONY TV VERTICAL NOT FULL
>
> hi
> if this set hasn`t vetical height preset, then you have to
> enter into service mode and increase the height.
> Let me know, i will send you the service code as i am not in the workshop
at
> the moment.
>
> best regards
> Nilesh
> ----- Original Message -----
> From: "VRM" <vrmsys@xxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Tuesday/mmmm/2002 1:22 AM
> Subject: [TechAssist] SONY TV VERTICAL NOT FULL
>
>
> > Hello;
> >
> > I will be very pleased if someone can help me repair this SONY TV with a
> vertical deflection Problem.
> >
> > The SET is a SONY 29 inch with MODEL number KV-29MF1, which powers up
> well, but having a vertical deflection (Picture) covering/centered around
> 80% of the screen. The SET has a vertical deflection booster IC TDA9379,
> which I suspected to be faulty and changed it, in addition to all
> electrolytic capacitors located in the vertical deflection section - i.e.
a
> valuable suggestion from response from a TECH ASSIST reply.
> >
> > The deflection loss is JUST the TOP and DOWN. I have good signal
> RECEPTION. The IMAGES are complete, i.e FULL image displayed, BUT my
problem
> is TOP and DOWN vertical deflection shortage.
> >
> >
> > The fault is still not repaired, aside that, the Vertical IC warms up
> INCREASINGLY at power up. Actaully I don't have a schematic diagram for
this
> SET.
> >
> > Would someone be willing to provide suggestions or ideas as to what next
I
> can touch to help solve this problem.
> >
> > WISHING YOU ALL the BEST OF the SEASON - Thanks a lot.
> >
> > Viktoria
> >
> > ------------------------------------------
> > Help make your TechAssist database better!
> > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> > ------------------------------------------
> > To UNSUBSCRIBE your email address, click here:
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > Or send a BLANK email with unsubscribe in the
> > SUBJECT field to the address above.
> >
>
>
> ------------------------------------------
> Help make your TechAssist database better!
> Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
------------------------------------------
Help make your TechAssist database better!
Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
