R508 39k? Richard ----- Original Message ----- From: "Edward Gaidies" <teltek@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, January 29, 2002 7:01 PM Subject: [TechAssist] Re: :SANYO AVM 276A shuts down on tv mode videook > > Let us know how you made out. > Regards; > > -Ed- > > > > > Thanks alot > > I think this tip is very close to get this problem solved I will try and let > > you know > > > > Ken Dinckan > > ALL Tv&Appliance Service > > 2747 Roosevelt Street # B > > Carlsbad CA, 92008 > > tel: (760)434-1131 > > fax: (760)434-8856 > > email to : kdinckan@xxxxxxx > > ----- Original Message ----- > > From: "Edward Gaidies" <teltek@xxxxxxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Tuesday, January 29, 2002 3:16 PM > > Subject: [TechAssist] Re: :SANYO AVM 276A shuts down on tv mode videook > > > > > >> > >> You may have to do some allignment of the AFT, sounds like you are weak on > >> the sync input. This is the same signal that autoprogram seeks. This is > > the > >> one that is not strong enough, and activates your autoshutdown Me thinks. > >> > >> -Ed- > >> > >>> > >>> ok I will try but don't you think if the signal weak picture should be > >>> snowy. When I change the channels first picture try to settle like > > tuning > >>> and then locks it in. Something to do with the signal. But since picture > >>> quality good I thought the signal not weak. > >>> thanks > >>> > >>> Ken Dinckan > >>> ALL TV&Appliance Service > >>> 2747 Roosevelt Street # B > >>> Carlsbad CA, 92008 > >>> tel: (760)434-1131 > >>> fax: (760)434-8856 > >>> email to : kdinckan@xxxxxxx > >>> ----- Original Message ----- > >>> From: "Gary McCartney" <number63@xxxxxxxxxxxxx> > >>> To: <techassist@xxxxxxxxxxxxx> > >>> Sent: Tuesday, January 29, 2002 2:28 PM > >>> Subject: [TechAssist] Re: :SANYO AVM 276A shuts down on tv mode video ok > >>> > >>> > >>>> > >>>> try connecting the cable directly to the tuner instead of going through > >>>> the balun - unless the arrangement has the RF connector built right on > >>>> the tuner. (make sure tv is plugged into isolation transformer) to see > >>>> if the signal is weak entering tuner. > >>>> > >>>> > >>>> > >>>> Gary McCartney > >>>> > >>>> McCartney Electronics > >>>> 7134 Fife Rd, RR 7 > >>>> Guelph Ontario Canada N1H 6J4 > >>>> Fax: (519)821-1530 > >>>> email: number63@xxxxxxxxxxxxx > >>>> > >>>> > >>>> > >>>> > >>>> Ken Dinckan wrote: > >>>>> > >>>>> hi Gary > >>>>> this happens when signal is present. replaced the tuner and micro > > still > >>>>> same. it is acting like no signal comin in tuner > >>>>> > >>>>> Ken Dinckan > >>>>> ALL Tv&Appliance Service > >>>>> 2747 Roosevelt Street # B > >>>>> Carlsbad CA, 92008 > >>>>> tel: (760)434-1131 > >>>>> fax: (760)434-8856 > >>>>> email to : kdinckan@xxxxxxx > >>>>> ----- Original Message ----- > >>>>> From: "Gary McCartney" <number63@xxxxxxxxxxxxx> > >>>>> To: <techassist@xxxxxxxxxxxxx> > >>>>> Sent: Tuesday, January 29, 2002 12:37 PM > >>>>> Subject: [TechAssist] Re: :SANYO AVM 276A shuts down on tv mode video > > ok > >>>>> > >>>>>> > >>>>>> Ken, maybe it has auto shut-off if no antenna is connected (no signal > >>>>>> present for 15 min. such as when station goes off air late at night, > >>> so > >>>>>> the set shuts off if viewer happens to fall asleep.) > >>>>>> > >>>>>> > >>>>>> > >>>>>> Gary McCartney > >>>>>> > >>>>>> McCartney Electronics > >>>>>> 7134 Fife Rd, RR 7 > >>>>>> Guelph Ontario Canada N1H 6J4 > >>>>>> Fax: (519)821-1530 > >>>>>> email: number63@xxxxxxxxxxxxx > >>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> Ken Dinckan wrote: > >>>>>>> > >>>>>>> Second Post > >>>>>>> Anyone have idea for this tv shuts down in 15 minutes when the tv > >>> mode > >>>>>>> selected. But when video input used won't shut down > >>>>>>> > >>>>>>> Ken Dinckan > >>>>>>> ALL Tv&Appliance Service > >>>>>>> 2747 Roosevelt Street # B > >>>>>>> Carlsbad CA, 92008 > >>>>>>> tel: (760)434-1131 > >>>>>>> fax: (760)434-8856 > >>>>>>> email to : kdinckan@xxxxxxx > >>>>>>> ----- Original Message ----- > >>>>>>> From: "Ken Dinckan" <kdinckan@xxxxxxx> > >>>>>>> To: <techassist@xxxxxxxxxxxxx> > >>>>>>> Sent: Tuesday, January 22, 2002 1:52 AM > >>>>>>> Subject: *****SPAM***** [TechAssist] Re: SANYO AVM 276A > >>>>>>> > >>>>>>>> > >>>>>>>> I did run for low AC but no change any other help you can give > >>>>>>>> thanks > >>>>>>>> > >>>>>>>> Ken Dinckan > >>>>>>>> ALL Tv&Appliance Service > >>>>>>>> 2747 Roosevelt Street # B > >>>>>>>> Carlsbad CA, 92008 > >>>>>>>> tel: (760)434-1131 > >>>>>>>> fax: (760)434-8856 > >>>>>>>> email to : kdinckan@xxxxxxx > >>>>>>>> ----- Original Message ----- > >>>>>>>> From: "Gonzalo Arrivas" <gna2000@xxxxxxx> > >>>>>>>> To: <techassist@xxxxxxxxxxxxx> > >>>>>>>> Sent: Wednesday, January 09, 2002 1:42 PM > >>>>>>>> Subject: [TechAssist] Re: SANYO AVM 276A > >>>>>>>> > >>>>>>>> > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> Ken, > >>>>>>>>> > >>>>>>>>> Try running it at a lower AC voltage (approx. 90VAC)using a > >>> variac > >>>>> on > >>>>>>> the > >>>>>>>> TV > >>>>>>>>> mode and see what happen and let me know. > >>>>>>>>> > >>>>>>>>> G.N.Arrivas, CET Pittsburg, CA > >>>>>>>>> http://www.etechhelponline,com > >>>>>>>>> > >>>>>>>>>> From: "Ken Dinckan" <kdinckan@xxxxxxx> > >>>>>>>>>> Reply-To: techassist@xxxxxxxxxxxxx > >>>>>>>>>> To: <techassist@xxxxxxxxxxxxx> > >>>>>>>>>> Subject: [TechAssist] SANYO AVM 276A > >>>>>>>>>> Date: Wed, 9 Jan 2002 00:33:04 -0800 > >>>>>>>>>> > >>>>>>>>>> anyone help for the Sanyo tv shuts down 10-15 minutes when tv > >>> mode > >>>>>>>>>> selected. Won't shut down when video inputs selected. Suspected > >>> IF > >>>>>>>>>> problem?? > >>>>>>>>>> > >>>>>>>>>> ------------------------------------------ > >>>>>>>>>> Help make your TechAssist database better! > >>>>>>>>>> Submit your fixes here: > >>> http://circuitwork.com/techassist/tip/#tips > >>>>>>>>>> ------------------------------------------ > >>>>>>>>>> To UNSUBSCRIBE your email address, click here: > >>>>>>>>>> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > >>>>>>>>>> Or send a BLANK email with unsubscribe in the > >>>>>>>>>> SUBJECT field to the address above. > >>>>>>>>>> > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> G.N.Arrivas, CET, Pittsburg. CA > >>>>>>>>> Tel/Fax: 925-432-2057 > >>>>>>>>> Email: gna2000@xxxxxxx > >>>>>>>>> > >>>>>>>>> For Tech Repair Help: > >>>>>>>>> http://www.etechhelponline.com > >>>>>>>>> (Now viewed by technicians in 60-plus countries worldwide.) > >>>>>>>> > >>>>>>> > >>>>> > >> > >>> ------------------------------------------------------------------------ - > > - > >>>>>>>>> Tax Help & Services: > >>>>>>>>> http://www.itaxhelponline.com > >>>>>>>> > >>>>>>> > >>>>> > >> > >>> ------------------------------------------------------------------------ - > >>>>>>>>> Business Opportunities & Lifestyle! > >>>>>>>>> http://www.arrivasenterprises.com > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> > >>> _________________________________________________________________ > >>>>>>>>> MSN Photos is the easiest way to share and print your photos: > >>>>>>>>> http://photos.msn.com/support/worldwide.aspx > >>>>>>>>> > >>>>>>>>> ------------------------------------------ > >>>>>>>>> Help make your TechAssist database better! > >>>>>>>>> Submit your fixes here: > >>> http://circuitwork.com/techassist/tip/#tips > >>>>>>>>> ------------------------------------------ > >>>>>>>>> To UNSUBSCRIBE your email address, click here: > >>>>>>>>> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > >>>>>>>>> Or send a BLANK email with unsubscribe in the > >>>>>>>>> SUBJECT field to the address above. > >>>>>>>>> > >>>>>>>>> > >>>>>>>> > >>>>>>>> > >>>>>>>> ------------------------------------------ > >>>>>>>> Make your TechAssist database better! > >>>>>>>> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > >>>>>>>> ------------------------------------------ > >>>>>>>> To UNSUBSCRIBE your email address, click here: > >>>>>>>> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > >>>>>>>> Or send a BLANK email with unsubscribe in the > >>>>>>>> SUBJECT field to the address above. > >>>>>>>> > >>>>>>>> > >>>>>>> > >>>>>>> ------------------------------------------ > >>>>>>> Make your TechAssist database better! > >>>>>>> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > >>>>>>> ------------------------------------------ > >>>>>>> To UNSUBSCRIBE your email address, click here: > >>>>>>> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > >>>>>>> Or send a BLANK email with unsubscribe in the > >>>>>>> SUBJECT field to the address above. > >>>>>> > >>>>>> -- > >>>>>> ------------------------------------------ > >>>>>> Make your TechAssist database better! > >>>>>> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > >>>>>> ------------------------------------------ > >>>>>> To UNSUBSCRIBE your email address, click here: > >>>>>> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > >>>>>> Or send a BLANK email with unsubscribe in the > >>>>>> SUBJECT field to the address above. > >>>>>> > >>>>>> > >>>>> > >>>>> ------------------------------------------ > >>>>> Make your TechAssist database better! > >>>>> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > >>>>> ------------------------------------------ > >>>>> To UNSUBSCRIBE your email address, click here: > >>>>> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > >>>>> Or send a BLANK email with unsubscribe in the > >>>>> SUBJECT field to the address above. > >>>> > >>>> -- > >>>> ------------------------------------------ > >>>> Make your TechAssist database better! > >>>> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > >>>> ------------------------------------------ > >>>> To UNSUBSCRIBE your email address, click here: > >>>> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > >>>> Or send a BLANK email with unsubscribe in the > >>>> SUBJECT field to the address above. > >>>> > >>>> > >>> > >>> > >>> ------------------------------------------ > >>> Make your TechAssist database better! > >>> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > >>> ------------------------------------------ > >>> To UNSUBSCRIBE your email address, click here: > >>> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > >>> Or send a BLANK email with unsubscribe in the > >>> SUBJECT field to the address above. > >>> > >> > >> -- > >> From: Ed Gaidies > >> teltek@xxxxxxxxxxx > >> Tel-Tek Electronics > >> > >> ------------------------------------------ > >> Make your TechAssist database better! > >> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > >> ------------------------------------------ > >> To UNSUBSCRIBE your email address, click here: > >> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > >> Or send a BLANK email with unsubscribe in the > >> SUBJECT field to the address above. > >> > > > > > > ------------------------------------------ > > Make your TechAssist database better! > > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ > > To UNSUBSCRIBE your email address, click here: > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > Or send a BLANK email with unsubscribe in the > > SUBJECT field to the address above. > > > > -- > From: Ed Gaidies > teltek@xxxxxxxxxxx > Tel-Tek Electronics > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. ---------------------------------------------------- Sign Up for NetZero Platinum Today Only $9.95 per month! http://my.netzero.net/s/signup?r=platinum&refcd=PT97 ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.