[TechAssist] Re: RCA PJR500SR
- From: "Clancy Harms" <dickstv1@xxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Wed, 12 Dec 2001 20:06:23 -0800
Bill is correct.
Clancy Harms NESDA's Region 7 Director
Dick's Radio & TV, Inc.
2319 West Clay St. If it's broken...a real man can
St. Charles, MO. 63301 can break it even better !
(636)-724-5055
(636)-724-5531 fax
email: dickstv1@xxxxxxxxxxxxx
mailto:dickstv1@xxxxxxxxxxxxx
----- Original Message -----
From: "Bill McFarland" <billmcfarland@xxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, December 12, 2001 9:00 AM
Subject: [TechAssist] Re: RCA PJR500SR
>
> Yeah, Now you mention it I remember that too.
>
> Wasen't it the Zero Point adjustment that drifted?
>
> Bill McFarland
> DMC Electronics
>
> ----- Original Message -----
> From: Clancy Harms <dickstv1@xxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Wednesday, December 12, 2001 9:11 AM
> Subject: [TechAssist] Re: RCA PJR500SR
>
>
> >
> > Is this unit really shutting down?
> > Or is it blanking the raster? Do you have audio?
> > Just curious. Because this set was known for a problem
> > that blanks out the video/raster
> >
> > Clancy Harms NESDA's Region 7 Director
> > Dick's Radio & TV, Inc.
> > 2319 West Clay St. If it's broken...a real man can
> > St. Charles, MO. 63301 can break it even better !
> > (636)-724-5055
> > (636)-724-5531 fax
> > email: dickstv1@xxxxxxxxxxxxx
> > mailto:dickstv1@xxxxxxxxxxxxx
> > ----- Original Message -----
> > From: <tvdoctors@xxxxxxxxxxxxx>
> > To: <Techassist@xxxxxxxxxxxxx>
> > Sent: Tuesday, December 11, 2001 12:51 PM
> > Subject: [TechAssist] RCA PJR500SR
> >
> >
> > > Still having problems with this set. Shuts down within 2 to 3 minutes
> > after turn on. If I hook an antenna to it after turn on I dont have to
> wait
> > 2 to 3 minutes for the unit to shut down, it shuts down immediately.
> Checked
> > Voltage reg. (IC901) and it was on 110 volts until set shuts down, then
> > jumps to around 135. I changed the reg. and it still does it. I noticed
on
> > the deflection board that diode D708 was missing (looks like someone
took
> it
> > out) I don't know if it's supposed to be there or not. Any help would be
> > appreciated, Thanks Neil
> > >
> > > TV Doctors 108 W. Main St. Monroe,Wa. 98272 360-794-6469
> > >
> > > =================================
> > > Help make your TechAssist database better!
> > > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> > > =================================
> > > To UNSUBSCRIBE your email address, click here:
> > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > >
> >
> > =================================
> > Help make your TechAssist database better!
> > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> > =================================
> > To UNSUBSCRIBE your email address, click here:
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> >
>
> =================================
> Help make your TechAssist database better!
> Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> =================================
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
>
=================================
Help make your TechAssist database better!
Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
=================================
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Other related posts:
