Yeah, Now you mention it I remember that too. Wasen't it the Zero Point adjustment that drifted? Bill McFarland DMC Electronics ----- Original Message ----- From: Clancy Harms <dickstv1@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, December 12, 2001 9:11 AM Subject: [TechAssist] Re: RCA PJR500SR > > Is this unit really shutting down? > Or is it blanking the raster? Do you have audio? > Just curious. Because this set was known for a problem > that blanks out the video/raster > > Clancy Harms NESDA's Region 7 Director > Dick's Radio & TV, Inc. > 2319 West Clay St. If it's broken...a real man can > St. Charles, MO. 63301 can break it even better ! > (636)-724-5055 > (636)-724-5531 fax > email: dickstv1@xxxxxxxxxxxxx > mailto:dickstv1@xxxxxxxxxxxxx > ----- Original Message ----- > From: <tvdoctors@xxxxxxxxxxxxx> > To: <Techassist@xxxxxxxxxxxxx> > Sent: Tuesday, December 11, 2001 12:51 PM > Subject: [TechAssist] RCA PJR500SR > > > > Still having problems with this set. Shuts down within 2 to 3 minutes > after turn on. If I hook an antenna to it after turn on I dont have to wait > 2 to 3 minutes for the unit to shut down, it shuts down immediately. Checked > Voltage reg. (IC901) and it was on 110 volts until set shuts down, then > jumps to around 135. I changed the reg. and it still does it. I noticed on > the deflection board that diode D708 was missing (looks like someone took it > out) I don't know if it's supposed to be there or not. Any help would be > appreciated, Thanks Neil > > > > TV Doctors 108 W. Main St. Monroe,Wa. 98272 360-794-6469 > > > > ================================= > > Help make your TechAssist database better! > > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > > ================================= > > To UNSUBSCRIBE your email address, click here: > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > > > ================================= > Help make your TechAssist database better! > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > ================================= > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > ================================= Help make your TechAssist database better! Submit your fixes here: http://circuitwork.com/techassist/tip/#tips ================================= To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe