One last mention: from my emails: For archives, Dead an no stby: Q14601 P4NC60 mosfet #258229 -comes as modification kit ; replace R14603 (1k) with 3.3k ,remove C14130 (470pf); and Q14602 (SMD-5B2)#147665 ;CR14611 #234048; CR14615 5.1V & CR14613 12V zeners That was the first time I had that chassis connected to my jig, after fixing the p.supply no picture-no filament V-why? Fil. V is deriver as usual from a flyback but is supplied to the filament in a DC form and the jig's CRT adapter has a tansformer in the path. So I modified the adapter to do DC and AC filament. Phil Bader Jim Myers wrote: >Partsfinder says it is a MMC101 but tag on chassis says it is MM101, >anyway when power switch is pressed it comes on and shuts down (sounds >like a kid going for the last bit of Pepsi through a straw only louder), >if tried again same thing then after trying a few times it will go on >and off three times. The H yoke pulse is lower than it should be and has >an extra little pulse between the normal pulses. T14451 rings good, >swapped it anyway with one from another chassis, no change. Tried >following the troubleshooting guide and schematic, what a pain. Anyone >have a tip or a shortcut on this one. > >Thanks, >******************************** >Since 1972 * >Jim Myers * >Telrad Electronics * >Fort Wayne Indiana * >******************************** > > >----------------------------------------------------------------------------- >Lost Password: >http://www.tech-assist.org and select "Login Problems?". >Email Archives: >//www.freelists.org/archives/techassist/ > > > > -- Philip Bader Jan Phyl TV Inc. (estab. 1976) 3420 Recker Hwy. Winter Haven, Fl. 33880 Fax (863) 299-8821 email: tjanphyl@xxxxxxxxxxxxxxx -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 265.6.13 - Release Date: 1/16/2005 ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/