That's CAN $$. Probably converts to about $90 US. Someone have a "scrapper"?;-) -Ed- Tel-Tek Electronics teltek3@xxxxxxxxxxxx Ontario-Canada -----Original Message----- From: techassist-bounce@xxxxxxxxxxxxx [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of Phillip R. Hull Sent: Thursday, July 08, 2004 9:24 AM To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Re: RCA 20" Model F19436 Chassis- TX809B (Dead) That price sounds high, what is the part number?? I just bought a gemstar for $58 Phillip R Hull STET phil245@xxxxxxxxxxxxx FAX 517--569-3075 Professional Technicians only ----- Original Message ----- From: "Tel-Tek Electronics" <teltek3@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, July 07, 2004 3:15 PM Subject: [TechAssist] Re: RCA 20" Model F19436 Chassis- TX809B (Dead) > Thanks to all. Thanks to Bob W. for sending me circuit description, I > have contributed to a bad Gemstar Module. My cost through Global would > be $116, and as I mentioned to Bob, customer would put another $40 with > that, he's got a new piece of crap from Walmart. > > Al....find out if these guys are hiring Canadians with a slight accent, > I'm ready to pack it up....also. > > -Ed- > > Tel-Tek Electronics > teltek3@xxxxxxxxxxxx > Ontario-Canada > > -----Original Message----- > From: techassist-bounce@xxxxxxxxxxxxx > [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of Old TV Man > Sent: Wednesday, July 07, 2004 2:42 PM > To: techassist@xxxxxxxxxxxxx > Subject: [TechAssist] Re: RCA 20" Model F19436 Chassis- TX809B (Dead) > > Ed, I have SAMS 4458 for a TX808B. > > Be sure to check TP 20 - TP22 -TP23 and TP25. I hope those are the same > on the 809. > > Max Bonnell > Bonnell TV > Robinson, IL > > Sender: techassist-bounce@xxxxxxxxxxxxx From: > teltek3@xxxxxxxxxxxx(Tel-Tek=A0Electronics) Date: Wed, Jul 7, 2004, > 10:00am (CDT+1) To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] RCA > 20" Model F19436 Chassis- TX809B (Dead) Reply=A0to: > techassist@xxxxxxxxxxxxx > > Need some advice on this set. Customer brought it in "Dead". He had it > apart, because he told me he could find any fuse. I notice the speaker > wires cut and re-spliced, also had a little hole drilled in the back, > which I suspect he ran the speaker wires out of. I don't know what he > ran these speaker wires to. But would a shorted Audio O/P kill this set > completely. > > =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0I don't expect to spend > much time on this set. And audio may not have anything to do with it. > Just need some quick advice, from someone that does these often. Set was > Manufactured in 2002, and has Guide+. > TIA > > -Ed- > Tel-Tek Electronics > teltek3@xxxxxxxxxxxx > Ontario-Canada > ---------------------------------------------- > > > ------------------------------------------------------------------------ > ----- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > > ------------------------------------------------------------------------ -- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ------------------------------------------------------------------------ ----- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/