[TechAssist] Re: RCA 20" Model F19436 Chassis- TX809B (Dead)
- From: "Phillip R. Hull" <phil245@xxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 8 Jul 2004 09:24:15 -0400
That price sounds high, what is the part number?? I just bought a gemstar
for $58
Phillip R Hull STET
phil245@xxxxxxxxxxxxx
FAX 517--569-3075
Professional Technicians only
----- Original Message -----
From: "Tel-Tek Electronics" <teltek3@xxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, July 07, 2004 3:15 PM
Subject: [TechAssist] Re: RCA 20" Model F19436 Chassis- TX809B (Dead)
> Thanks to all. Thanks to Bob W. for sending me circuit description, I
> have contributed to a bad Gemstar Module. My cost through Global would
> be $116, and as I mentioned to Bob, customer would put another $40 with
> that, he's got a new piece of crap from Walmart.
>
> Al....find out if these guys are hiring Canadians with a slight accent,
> I'm ready to pack it up....also.
>
> -Ed-
>
> Tel-Tek Electronics
> teltek3@xxxxxxxxxxxx
> Ontario-Canada
>
> -----Original Message-----
> From: techassist-bounce@xxxxxxxxxxxxx
> [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of Old TV Man
> Sent: Wednesday, July 07, 2004 2:42 PM
> To: techassist@xxxxxxxxxxxxx
> Subject: [TechAssist] Re: RCA 20" Model F19436 Chassis- TX809B (Dead)
>
> Ed, I have SAMS 4458 for a TX808B.
>
> Be sure to check TP 20 - TP22 -TP23 and TP25. I hope those are the same
> on the 809.
>
> Max Bonnell
> Bonnell TV
> Robinson, IL
>
> Sender: techassist-bounce@xxxxxxxxxxxxx From:
> teltek3@xxxxxxxxxxxx(Tel-Tek=A0Electronics) Date: Wed, Jul 7, 2004,
> 10:00am (CDT+1) To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] RCA
> 20" Model F19436 Chassis- TX809B (Dead) Reply=A0to:
> techassist@xxxxxxxxxxxxx
>
> Need some advice on this set. Customer brought it in "Dead". He had it
> apart, because he told me he could find any fuse. I notice the speaker
> wires cut and re-spliced, also had a little hole drilled in the back,
> which I suspect he ran the speaker wires out of. I don't know what he
> ran these speaker wires to. But would a shorted Audio O/P kill this set
> completely.
>
> =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0I don't expect to spend
> much time on this set. And audio may not have anything to do with it.
> Just need some quick advice, from someone that does these often. Set was
> Manufactured in 2002, and has Guide+.
> TIA
>
> -Ed-
> Tel-Tek Electronics
> teltek3@xxxxxxxxxxxx
> Ontario-Canada
> ----------------------------------------------
>
>
> ------------------------------------------------------------------------
> -----
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
>
>
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
