Hi Members, The yoke is buzzing, and the convergence is bad. Raster is stretched slightly vertically, overscanned at the bottom by about 1 inch. Convergence is the worst at the top, but, is bad from top to bottom. Color is pure, and all other functions work normal. This set was replaced by Philips with a newer model, under a service contract. They said I could keep the TV. I don't want to sink the price of a new yoke into it, just to find out it didn't solve the problem. I think the yoke is bad, but would like to know if a vertical problem could cause the yoke to buzz, and create these symptoms. Thanks for your opinions, LLW LeRoy Westlund Westlund TV & Electronics " Walk tall,...Walk straight 93 North Main and look the world Centerfield, UT 84622-0087 right in the eye " Ph./Fax 435-528-3822 mailto:LLW@xxxxxxxxxx ***************************************************************************** The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.html Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.html Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/