[TechAssist] Re: Mitsubishi VS60603- 6" vert no video
- From: "Tony S" <tcselectronics@xxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Mon, 7 Mar 2005 21:47:01 -0600
Thanks for the reply Leonard, but we have been faxless for about a year now.
We use to have the free fax service but when we sold our house our lawyer
faxed over our quota and they closed it down, we really haven't had enough
use for one to get the pay service but thanks for trying to help none the
less.
Tony Saracco
TCS ELECTRONICS
406 Andra Ct.
Gilberts, IL 60136
tcselectronics@xxxxxxxxx
----- Original Message -----
From: "Leonard Caillouet" <lcaillo@xxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Sunday, March 06, 2005 3:17 PM
Subject: [TechAssist] Re: Mitsubishi VS60603- 6" vert no video
> Tony,
>
> If you will include your fax number I will send you a copy on Monday.
> These
> are hard copies, not in electronic form.
>
> You might not need it, however. I have done many of these sets with
> coolant
> leaks, infact have two in the shop right now of this chassis. Every one
> that I have fixed has been repaired by fixing bad feed-through grommets.
> There is not much to do other than check the continuity of every one in
> the
> vicinity of the leak and solder a piece of fine wire on both sides through
> the hole. Every one that I thought had bad components got fixed with the
> feed throughs. Very tedious and time consuming to find them, but it
> always
> seems to fix them. Be sure to run the set for a good while on test, as
> some
> problems don't show up for a while. I have found that running the boards
> through the dishwasher a couple of times is the best way to be sure that
> all
> of the coolant is off.
>
> You can assure no future leaks with two pieces of 1" angle molding about a
> foot long wire tied to the spring loaded screws that hold the lens frame
> to
> the CRTs. It works great to channel any coolant from either the green and
> red or the green and blue to the area in front of the boards.
>
> Leonard Caillouet
> Electronics World
> 1261 NW 76 Blvd
> Gainesville, FL 32606
> 352-332-5608
> FAX 352-332-5668
>
> ----- Original Message -----
> From: "Tony S" <tcselectronics@xxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Sunday, March 06, 2005 10:36 AM
> Subject: [TechAssist] Mitsubishi VS60603- 6" vert no video
>
>
> Hi guys,
>
> would anyone be kind enough to scan me a copy of the signal bd to include
> connector RG and IC700 on a model VS60603 chassis # VZ5. This set had a
> fluid spill and now has 8" of vert sweep no video and no audio, I have
> cleaned up the board and repaired the feed thru's with same prob still
> present, I read about an open trace off IC 700 but a print would help.
>
> Tony Saracco
> TCS ELECTRONICS
> 406 Andra Ct.
> Gilberts, IL 60136
> tcselectronics@xxxxxxxxx
>
>
> ----------------------------------------------------------------------------
> -
> This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
> Lost Password: http://www.tech-assist.org and select "Login Problems?".
> Email Archives: //www.freelists.org/archives/techassist/
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.300 / Virus Database: 266.5.7 - Release Date: 3/1/05
>
>
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.300 / Virus Database: 266.5.7 - Release Date: 3/1/05
>
>
> -----------------------------------------------------------------------------
> This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
> Lost Password: http://www.tech-assist.org and select "Login Problems?".
> Email Archives: //www.freelists.org/archives/techassist/
>
-----------------------------------------------------------------------------
This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
Lost Password: http://www.tech-assist.org and select "Login Problems?".
Email Archives: //www.freelists.org/archives/techassist/
Other related posts:
