Don't know if this will help but I had one VS5007 that there was no video coming out of the Jungle IC. Hiiting the IC with heat brought back the video. Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: "Robinson Electronics" <RobinsonElectronics@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, March 15, 2005 11:07 AM Subject: [TechAssist] Mitsubishi Proj. Model VS5061. Chassis VZ1B. No video or OSD at all. Sound OK. > Can anyone help with this video problem? > Working without a schematic. > Originally (2 years ago) had video dark w/roll - had bypassed the pip > module. Worked good ever since. > Now this set has no video, or OSD at all. Sound is good. I checked what > tips I had listed on it -- > H/V is good. > R2045, R2048 checks good. Solder looks ok too. > I checked Q2H0 "ok" has the circuit diode in it already. > Cannot find any circuit faults as of yet. > > All help will be appreciated. Thanks. David. > > Robinson Electronics > 1075 Sweeten Creek Road > Asheville, NC 28803 > Ph./Fax. 828 274-3787 > Toll Free. 1-888 ROBELECT > www.robinsonelectronics.com > www.robelect.com > Mailto: RobinsonElectronics@xxxxxxxxxxx > > ----------------------------------------------------------------------------- > This Email List is Public. Remove: http://www.tech-assist.org/remove.htm > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/