be sure to remove any glue that may be on bottom or top of pc board, it will cause corrossion under neath to circuit traces. Robert tvservice@xxxxxxxxxxxxx H & H Electronics Inc ----- Original Message ----- From: "armando guerra" <birdie@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, April 19, 2005 7:18 PM Subject: [TechAssist] Mitsubishi Model CS-3515R\vertical problems > I have this set that came in with no vertical at all,just a line across > center .I replaced the LA7838 and the resistor that supplies the vcc to > the ic.I powered the tv on and not enough vertical defflection.I > replaced 3 caps in the vert.ckt and I now have a full screen but there > are 3 black lines about 6 inches from the top,like vertical > foldover.Also,the top portion of the images,for example the head of a > person is stredged.I replaced some more caps but still not right.I am > working without a service manual.Maybe somebody that has winstips will > have a tip or maybe a print of the vertical ckt so that I can trace the > problem.I am thinking eighter a diode is bad or a resistor increased in > value in the pump-up ckt but need the print.Thanks for your help. > Mando > Birdie's TV & Electronics > Casa Grande, AZ > > -------------------------------------------------------------------------- --- > This Email List is Public. Remove: http://www.tech-assist.org/remove.htm > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Appliance Repair List: http://www.tech-assist.org/secure/tip/chatjoin.htm#app > Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Appliance Repair List: http://www.tech-assist.org/secure/tip/chatjoin.htm#app Email Archives: //www.freelists.org/archives/techassist/