[TechAssist] Re: Mitsubishi CS35601 PIP problem fixed
- From: "alltv" <alltv@xxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Wed, 17 Dec 2003 12:39:59 -0800
Hi all,
By pass did not work on this set pip. Result was no color. Replacing all the
caps on pip module brought the color back and good sync stable picture.
Thanks for the help
Ken
email to : alltv@xxxxxxxxxxxxx
Ken Dinckan
All Tv&Appliance Service
2747 Roosevelt Street Suite B
Carlsbad CA, 92008
Phone : (760)434-1131
-----Original Message-----
From: techassist-bounce@xxxxxxxxxxxxx
[mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of Jorge Camboni
Sent: Wednesday, December 17, 2003 10:54 AM
To: techassist@xxxxxxxxxxxxx
Subject: [TechAssist] Re: Mitsubishi CS35601 PIP problem
Forget the PIP module. Once you bypass it there is
no further problem. If you have a video problem
it is somewhere else, assuming you bypassed it
properly.
Jorge
PS The famous 4 caps belong to the past,
several years ago. Now you'll find all caps
bad and the pc board ruined in most cases.
At 09:51 a.m. 17/12/03 -0800, you wrote:
>Hi Tony,
>I think you are right. I tried to bypass now set works but no color. So I
>will try to install all new caps see what happens. Before the bypass color
>was ok. I raised the video level picture stable but the color still
missing.
>I have seen some notes about the color problem caused by C7001 and I
>replaced that cap it didn't help. If you have any other tips please let me
>know
>thanks
>Ken
>
>email to : alltv@xxxxxxxxxxxxx
>Ken Dinckan
>All Tv&Appliance Service
>2747 Roosevelt Street Suite B
>Carlsbad CA, 92008
>Phone : (760)434-1131
>
>-----Original Message-----
>From: techassist-bounce@xxxxxxxxxxxxx
>[mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of tony saracco
>Sent: Wednesday, December 17, 2003 6:40 AM
>To: techassist@xxxxxxxxxxxxx
>Subject: [TechAssist] Re: Mitsubishi CS35601 PIP problem
>
>
>No the CS35601 will not bypass properly. Try to fix if you can. If you
>bypass this board your video level will be low and it will cause unstable
>sync. If the customer is not using any video inputs and only using the RF
>input , you can raise the video level adjustment slightly to compensate the
>weak sync after bypassing the PIP but this only works on RF input.
>
>Tony Saracco
>TCS ELECTRONICS
>Gilberts , IL 60136
>847-426-5880
>tcselectronics@xxxxxxxxx
>----- Original Message -----
>From: "alltv" <alltv@xxxxxxxxxxxxx>
>To: "Techassist@xxxxxxxxxxxxx" <techassist@xxxxxxxxxxxxx>
>Sent: Wednesday, December 17, 2003 12:10 AM
>Subject: [TechAssist] Mitsubishi CS35601 PIP problem
>
>
>Hi All
>I just want to know if anyone can tell me if the PIP can be bypass. Pip
>number 930B552 0,1,2
>Thanks in Advance
>
>email to : alltv@xxxxxxxxxxxxx
>Ken Dinckan
>All Tv&Appliance Service
>2747 Roosevelt Street Suite B
>Carlsbad CA, 92008
>Phone : (760)434-1131
>
>***************************************************************************
*
>*
>Lost Password:
>http://www.tech-assist.org and select "Login Problems?".
>Email Archives:
>//www.freelists.org/archives/techassist/
>
>
>***************************************************************************
*
>*
>Lost Password:
>http://www.tech-assist.org and select "Login Problems?".
>Email Archives:
>//www.freelists.org/archives/techassist/
>
>***************************************************************************
**
>Lost Password:
>http://www.tech-assist.org and select "Login Problems?".
>Email Archives:
>//www.freelists.org/archives/techassist/
Jorge Camboni, GY Electronics, Richardson, TX
****************************************************************************
*
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
*****************************************************************************
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
- » [TechAssist] Re: Mitsubishi CS35601 PIP problem fixed
