Phil, Was the new tuner the same part number as the original tuner? Robert tvservice@xxxxxxxxxxxxx H & H Electronics Inc Dallas, TX ----- Original Message ----- From: "Philip Bader" <tjanphyl@xxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, December 17, 2003 11:06 AM Subject: [TechAssist] Zenith A27A11D 9-1791-1 module black screen with OSD fix, upgrade > Originally came in with HV and black screen with OSD. No picture or > sound. Removed the 175-2721 tuner which was bad and loading down the > set. Now with old tuner out,can use A/V in and get good pix/sound with a > line in from VCR. > Ordered new 175-2721 tuner. Installed today but only snow for a few > moments, then may start working. > Zenith does not include this note with the tuner, but on the main board > you must replace resistor R3417 (originally a 680 ohm/ 1w) with a 470 > ohm/ 1 watt to compensate for the new tuners different current draw. > Set now has stable tuning. > Phil Bader > -- > Philip Bader > Jan Phyl TV Inc. (estab. 1976) > 3420 Recker Hwy. Winter Haven, Fl. 33880 > Fax (863) 299-8821 > email: tjanphyl@xxxxxxxxxxxxxxx > > **************************************************************************** * > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/