forget PIP module, nobody useing this stupid thing anyway. Jump input of video and audio with 4.7 bipolar caps and throw away PIP module! ----- Original Message ----- From: "Ralph Dorsey" <Merlin-Wizard@xxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Saturday, November 03, 2001 4:36 AM Subject: [TechAssist] Re: Mitsubishi CS 27401 > > it's the caps on the PIP module,,,,first of all they are 4.7uf at 50volt. you'll > probably see the them by the "ooze" laying on the board next to them. Carefully > remove them and then clean the area with acetone or something like that, You'll > need to check the traces around them also for continuity. if your lucky, you > can replace the two 4.7's on the left upper part of the board and the set will > work otherwise you'll have to check for some other bad lytic's else were on the > board. (p.s,,,the PIP can be purchased from mitz for around $80 plus shipping > > serviceman wrote: > > > If that chassis has the upright daughter board video/comb filter that is > > shielded check the surface mount capacitors on the board seems like they > > were 1uf or 10uf, but i have repaired some of them if that chassis uses this > > version, hope this helps. > > Jim Hull > > Hull TV & Applaince,Inc. > > Olney,IL. > > ----- Original Message ----- > > From: "preston McGiboney" <pmcgiboney@xxxxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Friday, November 02, 2001 12:52 PM > > Subject: [TechAssist] Mitsubishi CS 27401 > > > > > > > > Tv will come on normally. After short time will show > > > wavy lines mainly at upper portion of screen. Also, > > > when changing channels station will come in at first > > > then sometimes will drift off. If you switch cannels > > > then back it usually comes on and stays. Any help out > > > there? > > > > > > Thanks, Preston > > > > > > > > > > > > > > > > > > __________________________________________________ > > > Do You Yahoo!? > > > Find a job, post your resume. > > > http://careers.yahoo.com > > > Help make your TechAssist online repair tips > > > database better! Submit your fixes here: > > > http://www.circuitwork.com/techassist/tip/#tips > > > To unsubscribe write to: > > > techassist-request@xxxxxxxxxxxxx > > > with unsubscribe in the subject line. > > > > Help make your TechAssist online repair tips > > database better! Submit your fixes here: > > http://www.circuitwork.com/techassist/tip/#tips > > To unsubscribe write to: > > techassist-request@xxxxxxxxxxxxx > > with unsubscribe in the subject line. > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.