[TechAssist] Re: Mitsubishi CS 27401
- From: "serviceman" <serviceman@xxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Fri, 2 Nov 2001 23:33:19 -0600
If that chassis has the upright daughter board video/comb filter that is
shielded check the surface mount capacitors on the board seems like they
were 1uf or 10uf, but i have repaired some of them if that chassis uses this
version, hope this helps.
Jim Hull
Hull TV & Applaince,Inc.
Olney,IL.
----- Original Message -----
From: "preston McGiboney" <pmcgiboney@xxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Friday, November 02, 2001 12:52 PM
Subject: [TechAssist] Mitsubishi CS 27401
>
> Tv will come on normally. After short time will show
> wavy lines mainly at upper portion of screen. Also,
> when changing channels station will come in at first
> then sometimes will drift off. If you switch cannels
> then back it usually comes on and stays. Any help out
> there?
>
> Thanks, Preston
>
>
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Find a job, post your resume.
> http://careers.yahoo.com
> Help make your TechAssist online repair tips
> database better! Submit your fixes here:
> http://www.circuitwork.com/techassist/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with unsubscribe in the subject line.
Help make your TechAssist online repair tips
database better! Submit your fixes here:
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx
with unsubscribe in the subject line.
Other related posts:
