Ideas - relay stuck closed, control panel defective, Windex. Jerry Silverman Greentron Inc 4 Newland Ave Greenville SC 29609 864 232 3889 Fax 271 2080 mailto:greentron@xxxxxxx ----- Original Message ----- From: <t-warren@xxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Saturday, February 09, 2002 1:46 PM Subject: [TechAssist] Magnavox RC5266PE02 Chassis 25C109-BA - No Control > > I've written about this TV before - I'm about ready to give up... > > Plug it in and the high voltage kicks in powering up the crt - displays > snow - stays on until unplugged... Keypad is completely unresponsive and > volume is at full volume - have to keep speakers unplugged... > > I've gone through and re-soldered virtually everything on every board and > module - no change... Solder connections double-checked - still, no > change... > > I would suspect the on-screen tuner module but, I don't know if it's able > to communicate with the signal board or not... > > I've found 2 jumpers and a resistor on the signal board that had been > physically removed (cut) at one time but, I don't know if this model > needs these in order to operate as it appears this board was made for > more than 1 model and various components were added/removed depending on > model... If anyone has a schematic, could they tell me if JU2, JU6, and > R104 are supposed to be there or not - if they are, what is the value of > R104? > > Anybody have any ideas? > > Terry Warren > t-warren@xxxxxxxx > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.