I have found video amp transistor bad in theses units that causes this problem. > ** Original Subject: RE: [TechAssist] Re: Zenith B25A10Z (white raster) > ** Original Sender: "Damon" <DAMON101@xxxxxxxxxxxxxx> > ** Original Date: Sat, 9 Feb 2002 13:05:16 -0500 (EST) > ** Original Message follows... > > Let's isolate this problem: > Check your cathode voltage on all 3 collectors of your crt output > transistors > Check your screen voltage > > Screen voltage should be 200 to 400 volts, normally abut 250-300 is ideal > Cathode voltages should read 140 to 170 volts ideally. > > Since you have no sound/no video the video jungle is likely the cause, but > we may have a problem in the IF/video detector/sound detector section just > before the video jungle. > Let's make sure the CRT voltages are what they're supposed to be first. > Then we'll take a look at the IF/Switching/Video/Sound subsystems next. > > Damon Brunger > damon101@xxxxxxxxxxxxxx > Telrad Electronic Services > Ft Wayne, IN 46815 > ----- Original Message -----From: <javiles929@xxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Thursday, February 07, 2002 8:51 PM > Subject: [TechAssist] Zenith B25A10Z (white raster) > > > > Fellas after struggling for a month and half on this zenith i finaly got > it > > to life. But all i get is just the raster with no video and no sound. I > have > > check all of the transistors and diode with my tester and they all test > good. > > I remove the tuner to see if i least get a snowy picture with sound but > same > > white raster. Any ideas where i should go now. I only get 200V on the > > collector of the HOT and 75V on E and B. your help is appreciated. > > > > Thanks in advance. > > > > Aviles Computer & Tv Repairs > > Bronx, NY 10452 > > Fax 1-718-681-3117 > > > > > > > > ------------------------------------------ > > Make your TechAssist database better! > > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ > > To UNSUBSCRIBE your email address, click here: > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > Or send a BLANK email with unsubscribe in the > > SUBJECT field to the address above. > > > > > > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > >** --------- End Original Message ----------- ** > TV Doctors 108 W. Main St. Monroe,Wa. 98272 360-794-6469 ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.