Jerry, I had a CCZ134AT01 that had a similar problem, would play a tape OK, but would only stay on about 3 seconds if turned on without inserting a tape. It also sounded like it was trying to load a tape, with no tape in the unit. Ended up being a bad tape end sensor causing the problem. Just something you may want to check. Dan Webster Webster's TV Shullsburg, Wi. ----- Original Message ----- From: <jhoeme@xxxxxxxxxxxxx> To: "Techassist" <techassist@xxxxxxxxxxxxx> Sent: Tuesday, February 17, 2004 4:53 PM Subject: [TechAssist] Magnavox CCS139AT02 combo pwr prob > This 13" TVCR has strange power control problem. Has all standby voltages 112v, 11.5v, 5.2v etc. > Cannot turn on or off using remote or front panel buttons. However it will power up if a tape is inserted. > Then will play tape and all buttons work except power button. After ejecting tape can switch from A/V to Chan 2 using remote or front panel buttons. Menu, Power and direct access channel buttons on remote have no effect. > Any ideas? > TIA > Jerry Hoeme > Jerry's TV Service (Estab. 1978) > 840 S. Kansas Ave > Liberal, KS 67901 > jhoeme@xxxxxxxxxxxxx > For Professional Techs only > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/