Sounds like it is in a lock mode. If there is no obvious unlock procedure try holding down the power button on the remote for 10 seconds or so. J Silverman > This 13" TVCR has strange power control problem. Has all standby voltages > 112v, > 11.5v, 5.2v etc. > Cannot turn on or off using remote or front panel buttons. However it will > power up if a tape is inserted. > Then will play tape and all buttons work except power button. After ejecting > tape can switch from A/V to Chan 2 using remote or front panel buttons. > Menu, > Power and direct access channel buttons on remote have no effect. > Any ideas? > TIA > Jerry Hoeme > Jerry's TV Service (Estab. 1978) > 840 S. Kansas Ave > Liberal, KS 67901 > jhoeme@xxxxxxxxxxxxx > For Professional Techs only > > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/