[TechAssist] Re: How to change fluid in a ptv
- From: "Intrepid Video Support" <support@xxxxxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Tue, 4 Jan 2005 22:24:05 -0500
Jason,
Not all projos are a like...especially the RCA's.
We need to know model numbers...you know better.
If it's a PTK195-169, it's pretty simple. The newer ones I haven't done.
You need to prop up the CRT, remove the lens and cover for chamber, drain out
liquid.
Use the rubber gasket on the side to refill. This comes off with four screws.
Be sure this
rubber piece is not worn. Be careful tightening the screws back on as they are
easily
stripped. Don't not use a cordless driver.
The instructions are not in the manual because RCA wanted you to replace the
CRT.
Jeff
--
Intrepid Video TV/VCR Repair
263 S Front St, Steelton PA 17113
717-939-7708; (F) 717-564-4952
www.intrepid-video.com www.tech-repair.net
----- Original Message -----
From: "Jason - Excel Distributing" <JMartin@xxxxxxxxxxxxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Tuesday, January 04, 2005 9:16 AM
Subject: [TechAssist] Re: How to change fluid in a ptv
Thanks for the replies guys.
It is for a RCA, I didn't see anything in the service info, maybe I
overlooked it as I don't look for that type of info often.
Bill - It is a service center, a new one man shop that used to work for a
large rental company but he never did the projos, until now. I refer retail
callers to my customers every day.
Dave, Jay - Thanks, I'll pass along the Philips info, it should be close
enough to work.
Thanks again guys!
Sincerely,
Jason Martin
Excel Distributing Inc.
1819 Mentor Ave.
Cincinnati, Ohio 45212
ph-800-733-3329 fax- 800-735-8007
www.ExcelDistributingInc.com
----- Original Message -----
From: "Bill Grabowski" <bgrabowski@xxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Monday, January 03, 2005 8:47 PM
Subject: [TechAssist] Re: How to change fluid in a ptv
> The first step would be to recommend a good TV tech in your area to do
> the job.
>
> Bill Grabowski
> Triangle Appliance
> Kenosha,Wi 53142
>
> Jason - Excel Distributing wrote:
> > Hi guys,
> > I have a customer looking to change some fluid in a projo. It is the
first one he's done and he was wondering if there is anything anywhere
stating the steps to doing this. Any help is appreciated.
> >
> > Sincerely,
> >
> > Jason Martin
> > Excel Distributing Inc.
> > 1819 Mentor Ave.
> > Cincinnati, Ohio 45212
> >
> > ph-800-733-3329 fax- 800-735-8007
> > www.ExcelDistributingInc.com
> >
> >
>
> --------------------------------------------------------------------------
---
> > Lost Password:
> > http://www.tech-assist.org and select "Login Problems?".
> > Email Archives:
> > //www.freelists.org/archives/techassist/
> >
>
> --
> *****************************
> Bill Grabowski
> Triangle Appliance
> Kenosha,Wi 53142
> 262-694-6500
> 262-694-6523 fax
> bgrabowski@xxxxxxxxx
> *****************************
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
>
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
