[TechAssist] Re: Hitachi VT-F462A
- From: "Tommy Herman" <hermantv@xxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Sat, 16 Feb 2002 07:43:55 -0500
My mistake...I said I have no sound in the EE mode...what I should have said
is ...I have no sound in the Tuner mode...all tape modes are OK!
Sorry for the confusion..Stan...Herman TV
----- Original Message -----
From: Premium Technologies <premtech@xxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Friday, February 15, 2002 2:41 PM
Subject: [TechAssist] Re: Hitachi VT-F462A
>
> Stan,
> What you have there is a Hitachi tape eater. Usually known for poor
torque
> in the clutch/idler assembly and reel functions in general. In your case,
> if you're getting sound in the SP mode but not extended check the brake on
> the supply reel. Put a dummy cassette in and see if the supply reel spins
> fairly easy. If so replace the brake and re-set the tension. The
> additional tension is needed for audio at slower turning speeds. When you
> do this, you might also have to replace the pinch roller if it's worn or
> glazed in order to pull against the added tension.
> Hope this helps.
> Bill
>
> Premium Technologies
> 27501 V Street
> Ocean Park, Washington 98640
> Phone: (360) 665-5984
> Fax: (775) 860-7747
> email: premtech@xxxxxxxxxxxxxx
> ----- Original Message -----
> From: "Tommy Herman" <hermantv@xxxxxxxxxxxxx>
> To: "techassist" <techassist@xxxxxxxxxxxxx>
> Sent: Friday, February 15, 2002 7:21 AM
> Subject: [TechAssist] Hitachi VT-F462A
>
>
> >
> > I have a Hitachi VT-F462A VCR that has no sound in EE mode. Playback is
> > fine. We normally do not do VCR's anymore and would like to repair this
> one
> > quickly if we can. Any help would be apreciated.
> > Stan...Herman TV
> >
> >
> >
> > --- hermantv@xxxxxxxxxxxxx
> >
> >
> > ------------------------------------------
> > Make your TechAssist database better!
> > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> > ------------------------------------------
> > To UNSUBSCRIBE your email address, click here:
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > Or send a BLANK email with unsubscribe in the
> > SUBJECT field to the address above.
>
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
