Hi, I would like if you help me, with the following problem; I Have to TV RCA Chassis CTC187BK, when turn on this automatically turn of, this is periodic once turn on. I think that Regulator U4101 is bad, what do you think, thank. Regard Oscar Leiva -----Mensaje original----- De: techassist-bounce@xxxxxxxxxxxxx [mailto:techassist-bounce@xxxxxxxxxxxxx] En nombre de Paul Westcott Enviado el: Monday, March 11, 2002 2:40 PM Para: techassist@xxxxxxxxxxxxx Asunto: [TechAssist] Re: Hitachi TV chassis NP83LX, jail bars across screen Gary, The generic flyback is definitely the problem. Because of the jail bars, I never use a generic on a Hitachi set bigger than 20 inch. Try putting a .001 mfd. 400 volt ceramic cap from the crt screen supply to ground. Paul Westcott Kingsway Electronics Sudbury, Ontario Canada. Phone 705 566-9290 Fax 705 566-5349 westcott@xxxxxxx kingswayelectronics@xxxxxxxxxx Fax 705 566-5349 paul.westcott@xxxxxxxxxxxx -----Original Message----- From: Gary McCartney <number63@xxxxxxxxxxxxx> To: techassist@xxxxxxxxxxxxx <techassist@xxxxxxxxxxxxx> Date: Monday, March 11, 2002 12:01 PM Subject: [TechAssist] Hitachi TV chassis NP83LX, jail bars across screen > >This is a 27" Hitachi , model TE-4440X, chassis NP83LX. > >I replaced the flyback with an Asti Magnetics replacement, # 2433843. >Now set works fine other than there are jail bars across the screen. The >bars are not solid black, but rather a dull kind of shadow, and gradully >fade out toward the right side of the screen. The bars are about 3/4 >inch wide and 2 inch between them. > >I have changed caps around the flyback: C707, C717, C720, and C724. Also >changed a few caps in the SMPS which were high ESR. Problem still >exists. Is it possible this generic flyback is causing the symptoms? > >Thanks for any help. >-- > > > >Gary McCartney > >McCartney Electronics >7134 Fife Rd, RR 7 >Guelph Ontario Canada N1H 6J4 >Fax: (519)821-1530 >email: number63@xxxxxxxxxxxxx >------------------------------------------ >Make your TechAssist database better! >Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ >------------------------------------------ >To UNSUBSCRIBE your email address, click here: >mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe >Or send a BLANK email with unsubscribe in the >SUBJECT field to the address above. > > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above. ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.