[TechAssist] Re: Hitachi TV chassis NP83LX, jail bars across screen
- From: "Paul Westcott" <westcott@xxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Mon, 11 Mar 2002 13:40:02 -0500
Gary,
The generic flyback is definitely the problem.
Because of the jail bars, I never use a generic
on a Hitachi set bigger than 20 inch.
Try putting a .001 mfd. 400 volt ceramic cap
from the crt screen supply to ground.
Paul Westcott
Kingsway Electronics
Sudbury, Ontario
Canada.
Phone 705 566-9290
Fax 705 566-5349
westcott@xxxxxxx
kingswayelectronics@xxxxxxxxxx
Fax 705 566-5349
paul.westcott@xxxxxxxxxxxx
-----Original Message-----
From: Gary McCartney <number63@xxxxxxxxxxxxx>
To: techassist@xxxxxxxxxxxxx <techassist@xxxxxxxxxxxxx>
Date: Monday, March 11, 2002 12:01 PM
Subject: [TechAssist] Hitachi TV chassis NP83LX, jail bars across screen
>
>This is a 27" Hitachi , model TE-4440X, chassis NP83LX.
>
>I replaced the flyback with an Asti Magnetics replacement, # 2433843.
>Now set works fine other than there are jail bars across the screen. The
>bars are not solid black, but rather a dull kind of shadow, and gradully
>fade out toward the right side of the screen. The bars are about 3/4
>inch wide and 2 inch between them.
>
>I have changed caps around the flyback: C707, C717, C720, and C724. Also
>changed a few caps in the SMPS which were high ESR. Problem still
>exists. Is it possible this generic flyback is causing the symptoms?
>
>Thanks for any help.
>--
>
>
>
>Gary McCartney
>
>McCartney Electronics
>7134 Fife Rd, RR 7
>Guelph Ontario Canada N1H 6J4
>Fax: (519)821-1530
>email: number63@xxxxxxxxxxxxx
>------------------------------------------
>Make your TechAssist database better!
>Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
>------------------------------------------
>To UNSUBSCRIBE your email address, click here:
>mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
>Or send a BLANK email with unsubscribe in the
>SUBJECT field to the address above.
>
>
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
