Hitachi CT7881 Chassis G9LXU MFD 1990 27" TV Set is dead. Have about come to the conclsuion it is the micro IC0101. Have the 5v to the front pannel. Will not turn on. Clock pulse on pin 26 is ?? rather attenulated there is 5v on that pin and the front switch sends 4.8v to it thru a diode but is not doing anything at the turn on pin of the Micro. If I jumper the main relay I get high voltage and normal deflection blank raster since the front end is not working... Customer claims it just stoped working but this is also summer thunderstorm season in southern Arizona so I can't be 100%. Any ideas other than the Micro?. have the manual from the Hitachi web site but is very hard to read- looks like a 1 bit conversion from microfice. Peter Oliver Tucson Radio TV _________________________________________________________________ MSN 8: Get 6 months for $9.95/month. http://join.msn.com/?page=dept/dialup ***************************************************************************** Classifieds! Buy or Sell! http://sell.tech-assist.org The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/