Try taking the high voltage lead out of the splitter, and see if it stays running. If it does, you've found your problem Phil Bader wrote: > > >-------- Original Message -------- >Subject: CTC169 dead,just one chirp... >Date: Tue, 19 Mar 2002 07:20:37 -0500 >From: Phil Bader <philbad@xxxxxxxxxx> >Organization: Jan Phyl TV Inc. Winter Haven, Fl. Est.1976.voice / fax >863-299-8821 > > >My tech-friend at another shop has this one.Would not power on >originally, and the SMPS was raspy. He found and changed all surrounding >lytic caps around SMPS IC U4101. Now SMPS is quiet,in stby has +138 VDC >on coll of HOT. CR4118 cathode has +13VDC. Push power and not three, but >just ONE chirp, and nothing. Any suggestions? Thanks. (note: cannot >unplug audio board as it's not a seperate board on this model >apparently) >------------------------------------------ >Make your TechAssist database better! >Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ >------------------------------------------ >To UNSUBSCRIBE your email address, click here: >mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe >Or send a BLANK email with unsubscribe in the >SUBJECT field to the address above. > > -- Ralph Dorsey Atlas Tv Milwaukee.Wi 414-545-2303 ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.