[TechAssist] Re: [Fwd: CTC169 dead,just one chirp...]
- From: "Damon" <DAMON101@xxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Fri, 22 Mar 2002 18:35:34 -0500
Unplug the IHVT wire from the HV Splitter, tuck it under the wood box and
fire it up. Splitter is a one chirp symptom.
Damon Brunger
damon101@xxxxxxxxxxxxxx
Telrad Electronic Services
Ft Wayne, IN 46815
----- Original Message -----
From: "Phil Bader" <philbad@xxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Friday, March 22, 2002 4:35 AM
Subject: [TechAssist] Re: [Fwd: CTC169 dead,just one chirp...]
>
> tech said he had no horiz. drive from the jungle chip. I think he went
> no further.
>
> Phil Bader wrote:
> >
> > -------- Original Message --------
> > Subject: CTC169 dead,just one chirp...
> > Date: Tue, 19 Mar 2002 07:20:37 -0500
> > From: Phil Bader <philbad@xxxxxxxxxx>
> > Organization: Jan Phyl TV Inc. Winter Haven, Fl. Est.1976.voice / fax
> > 863-299-8821
> >
> > My tech-friend at another shop has this one.Would not power on
> > originally, and the SMPS was raspy. He found and changed all surrounding
> > lytic caps around SMPS IC U4101. Now SMPS is quiet,in stby has +138 VDC
> > on coll of HOT. CR4118 cathode has +13VDC. Push power and not three, but
> > just ONE chirp, and nothing. Any suggestions? Thanks. (note: cannot
> > unplug audio board as it's not a seperate board on this model
> > apparently)
> > ------------------------------------------
> > Make your TechAssist database better!
> > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> > ------------------------------------------
> > To UNSUBSCRIBE your email address, click here:
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > Or send a BLANK email with unsubscribe in the
> > SUBJECT field to the address above.
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
>
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
