Lloyd, I am not sure where the pump is on this thing, but after so many cleanings the Ink Level Indicators shows that quite a bit of ink as been used. So I guess the ink is being dumped (into the wet sponge at the far right of the printer?). At this point I wish it weren't so. Maybe an electronic problem? Bil ----- Original Message ----- From: "Lloyd Pearson" <Lloyd@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, October 30, 2001 12:00 AM Subject: [TechAssist] Re: Epson Printer - WON'T PRINT > > Try a few drops of water on top of the pump sponge to ensure the pump is > working, > and note whether ink is being sucked through the jets to recolour the sponge > again. > If the sponge gets recoloured, then jets aren't blocked. Some models have a > hole at the > left end of the carriage bay where ink is squirted during the clean cycle. > A piece of white tissue > down the hole will tell you if the head is ejecting ink. > > -----Original Message----- > > From: Bil Green [SMTP:tv.vcrrepair@xxxxxxxxxxx] > > Sent: Tuesday, October 30, 2001 8:49 PM > > To: .Techassist > > Subject: [TechAssist] Epson Printer - WON'T PRINT > > > > > > Epson Stylus Color 860 > > Printer > > > > EXTREMELY faint lettering visible (only bits & > > pieces - often nothing at all) > > > > I performed many cleaning cycles, including using > > cartridges filled with 409 cleaner (has worked > > well for someone else) > > > > Pulled the heads and soaked them in window > > cleaner (another tried and proven fix) - still works > > the same > > > > Can someone tell me of a simple procedure to > > isolate which area is causing almost no printing? > > (Epson printers do not have the heads in the print > > cartridges). > > > > Thank, > > > > Bil > > > > > > > > > > > > Help make your TechAssist online repair tips > > database better! Submit your fixes here: > > http://www.circuitwork.com/techassist/tip/#tips > > To unsubscribe write to: > > techassist-request@xxxxxxxxxxxxx > > with unsubscribe in the subject line. > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.