Jim, From Tech Repair CD: Emerson\EWC1902\Tuning looks like AFT way off\\\\Use Funai service remote ( one with jumper in place inside remote) pushed wake on remote to get into service mode* and changed the VVCO data from 2 to 21\\\\\\\\\ Jeff -- Intrepid Video TV/VCR Repair 263 S Front St, Steelton PA 17113 717-939-7708; (F) 717-564-4952 www.intrepid-video.com www.tech-repair.net ----- Original Message ----- From: "Jim Myers" <jr.myers@xxxxxxxxxxx> To: "TechAssist" <techassist@xxxxxxxxxxxxx> Sent: Thursday, June 03, 2004 4:32 PM Subject: [TechAssist] Emerson EWC1303, AFT lock problem When channel is changed it searches three or four times then locks, looks like AFT needs to be adjusted. Is there a service menu setting for this? How to access and adjust? If not does anyone have a tip? We have replaced the tuner, no change. Thanks, ********************************************************************************************************** ********* Since 1972 Jim Myers Telrad Electronics Fort Wayne, Indiana ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/