[TechAssist] Re: Emerson EWC1303, AFT lock problem

  • From: "John at Main TV" <maintv2004@xxxxxxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Fri, 4 Jun 2004 08:53:34 -0600

Emerson EWC1303 is the same as a Symphoinic SC313D or Sylvania 6313CD or
Magnavox MC132EMG.  According to Magnavox manual you can remove the cover of
the customers remote (3 screws) and place a jumper across J1 to make it a
service remote.  I have never done this so I do not know exactly what that
means.  I did not see a menu setting for VVCO but the manual is pretty
vague.  HTH, John.
John Mielke
Main TV
636 main St.
Longmont, Co
phone 303 776 6955
fax  303 776 0792
maintv2004@xxxxxxxxxxx

----- Original Message ----- 
From: "Jim Myers" <jr.myers@xxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Friday, June 04, 2004 8:34 AM
Subject: [TechAssist] Re: Emerson EWC1303, AFT lock problem


> Thanks for the info Jeff, is it possible to move a jumper in the
> original remote to make it a service remote or do I have to purchase a
> service remote?
>
****************************************************************************
***************************************
> Since 1972
> Jim Myers
> Telrad Electronics
> Fort Wayne, Indiana
>
> Intrepid Video Support wrote:
> > Jim,
> >>From Tech Repair CD:
> > Emerson\EWC1902\Tuning looks like AFT way off\\\\Use Funai service
remote ( one with jumper  in place
> > inside remote) pushed wake on remote to get into service mode* and
changed the VVCO data from 2 to
> > 21\\\\\\\\\
> > Jeff
> > --
> > Intrepid Video TV/VCR Repair
> > 263 S Front St, Steelton PA 17113
> > 717-939-7708; (F) 717-564-4952
> > www.intrepid-video.com  www.tech-repair.net
> > ----- Original Message ----- 
> > From: "Jim Myers" <jr.myers@xxxxxxxxxxx>
> > To: "TechAssist" <techassist@xxxxxxxxxxxxx>
> > Sent: Thursday, June 03, 2004 4:32 PM
> > Subject: [TechAssist] Emerson EWC1303, AFT lock problem
> >
> >
> > When channel is changed it searches three or four times then locks,
> > looks like AFT needs to be adjusted. Is there a service menu setting for
> > this? How to access and adjust? If not does anyone have a tip? We have
> > replaced the tuner, no change.
> > Thanks,
> >
****************************************************************************
******************************
> > *********
> > Since 1972
> > Jim Myers
> > Telrad Electronics
> > Fort Wayne, Indiana
> >
>
> --------------------------------------------------------------------------
---
> > Lost Password:
> > http://www.tech-assist.org  and select "Login Problems?".
> > Email Archives:
> > //www.freelists.org/archives/techassist/
> >
> >
> >
>
> --------------------------------------------------------------------------
---
> > Lost Password:
> > http://www.tech-assist.org  and select "Login Problems?".
> > Email Archives:
> > //www.freelists.org/archives/techassist/
> >
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org  and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
>

-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/

Other related posts:

  1. Home
  2. techassist
  3. Archive
  4. 06-2004