Hi Ed I think I got it from Gizmo I can forward it to you if you want it..Eric Tel-Tek Electronics wrote: > > Eric; > Where did you come up with this Elect/Mitsubishi cross? > > -Ed- > teltek@xxxxxxxxxxx > TEL-TEK ELECTRONICS. > > ----- Original Message ----- > From: "Eric Manuel" <tvman@xxxxxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Friday, January 04, 2002 11:31 AM > Subject: [TechAssist] Re: Electrohome 69ck02-clicking on/off > > > > > Ian cant help you but this crosses to MGA CS2915C if you dont get any > > help > > try posting this # Eric > > > > Ian Scott wrote: > > > > > > Hello folks, I have a TV that clicks on/off when I hit the power button. > > > If I short the power relay contacts it runs ok. There are two > > > transistors that drive the power relay coil. I replaced them, the unit > > > started to work and worked for several days (until my customer took it > > > home, then it quit working). > > > I have replaced the power relay, a capacitor (220ufd/10v) right next to > > > power relay, and checked resistors in and around the circuit. I thought > > > I had repaired it after I replaced the capacitor, because it started > > > working again, and continued to work for several hours. The next > > > morning it was back to the same on/off fault. > > > The base of the first transistor stays at .6 volts after the power > > > button is pressed, but the second transistor's base is changing, which > > > powers the relay on/off. I do not have a schematic. > > > I appreciate any help. > > > > > > Thanks in advance, > > > Ian Scott > > > Service Depot > > > > > > ------------------------------------------ > > > Help make your TechAssist database better! > > > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > > > ------------------------------------------ > > > To UNSUBSCRIBE your email address, click here: > > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > > Or send a BLANK email with unsubscribe in the > > > SUBJECT field to the address above. > > ------------------------------------------ > > Help make your TechAssist database better! > > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > > ------------------------------------------ > > To UNSUBSCRIBE your email address, click here: > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > Or send a BLANK email with unsubscribe in the > > SUBJECT field to the address above. > > > > ------------------------------------------ > Help make your TechAssist database better! > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. ------------------------------------------ Help make your TechAssist database better! Submit your fixes here: http://circuitwork.com/techassist/tip/#tips ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.