Thanks Al....I'll have to check that monday...could be. I have all kinds of MCY005A's. -Ed- On Saturday, November 16, 2002, at 10:11 PM, Al Gutz wrote: > > Ed > J4 is the supply to the IR pickup module. Pin 1 input from IR > Pin 2 grnd. Pin 3 11.4V line supply to IR module. Note pin 19 of U4 is > the B+ supply to U4. If remove J4 allows set to work possible short in > IR module MCY005A. > > Al G > > Edward Gaidies wrote: >> >> Some one have anything on this MSC26A module for "Dead Set". If I >> pull the >> J4 plug off the module.... set will come on. >> This is a 14" set.....and really don't want to have to replace the MSC >> module. >> Chassis looks like CTC117 but could be CTC120..label missing. >> TIA.. >> >> -Ed- >> Ed Gaidies >> Tel-Tek Electronics >> Ontario-Canada >> >> teltek2@xxxxxxxxxxxx >> >> ------------------------------------------ >> To REMOVE your email address, click here: >> http://www.tech-assist.org/unsubb.html >> To CHANGE your email address, click here: >> http://www.techassist.net/forms/change.html >> ------------------------------------------ >> ***NEW*** Tips Added Instantly!!!*** >> Submit Repair Tips here: >> http://www.tech-assist.org/secure/tip/ > > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > > Tel-Tek Electronics teltek2@xxxxxxxxxxxx ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/