Get the chipper check, you will need it sooner or later! I have both, never used the Pony. Bruce B&T Electronics 139 Margaret St Sarnia Ontario Canada N7T 2Y3 (519) 344-1850 btied@xxxxxxxxxxxx ----- Original Message ----- From: Huds <huds@xxxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, September 27, 2002 6:20 PM Subject: [TechAssist] EEPROM READER > > Hi All, > I am interested in getting a eeprom reader and would like your ideas who use > the different one and the one that can > read the different set do the most for the buck, out of the pony and the > chipcheck which will do the most different > sets and at what cost.. > thanks Huds. > Leroy Hudson > 112 Maple Dr. > Perry, Fl. 32348 > Ph:850-838-2125 > Fax:same # > email:huds@xxxxxxxxxxxxxxxxx > > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.391 / Virus Database: 222 - Release Date: 9/19/02 ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/